Bachelor of Engineering and Bachelor of Science
NOTE: This course has been updated - please refer to the undergraduate handbook change register for details.
Course code: 0085 ~ Course abbreviation: BE/BSc ~ Total credit points required: 240 ~ 5 years full-time, 10 years part-time ~ Managing faculty: Engineering
Study mode and course location
On-campus (Clayton)
Course description
This program provides an opportunity to combine studies in many areas of science with a specialisation in one of the following branches of engineering: chemical engineering, civil engineering, electrical and computer systems engineering, materials engineering and mechanical engineering. In the double degree course structure, restrictions have been imposed in terms of prescribed units to ensure that students pursue studies that suitably equip them for the subsequent levels in science and engineering.
Course objectives
This course enables students to complement studies in one of five branches of engineering by selecting units from the very wide range of disciplines offered by the Faculty of Science.
Course structure
The first two semesters of the course are largely common to all branches of engineering studies, with all students studying mathematics, some engineering units and either chemistry or physics. Normally students must identify which branch of engineering they plan to study at the commencement of Level 1, but those who are unsure of which branch to pursue are advised to consider enrolling in CHM1011, MTH1030 (or MTH1020) and PHS1011 (or PHS1080) and either ENG1060 or an engineering unit in a branch of interest in their first semester and to consult the academic adviser prior to second semester for further unit selection.
The large majority of students entering the faculty have completed the Victorian Certificate of Education (VCE), and references in the following paragraphs are to the prerequisite VCE subjects. Some domestic and international students enter the faculty with equivalent qualifications, and advice about unit choice for students with qualifications other than the VCE may be obtained from the faculty administration offices. Selected units are specified for students who have not completed appropriate VCE studies.
Core studies
Students must complete major and minor sequences towards the science component of this double-degree. Students in all engineering branches may pursue a science major sequence in astrophysics, mathematics, physics or computer science. There are additional science sequences offered in some streams, including:
- physiology (leading to biomedical engineering in the electrical and computer systems engineering and mechanical engineering branches, and biomaterials engineering in the materials engineering branch)
- atmospheric science, biochemistry, geosciences, chemistry, materials science, chemistry and life sciences in the chemical engineering branch
- geosciences, atmospheric science, biology/ecology and materials science in the civil engineering branch.
- atmospheric science, biochemistry, geosciences, chemistry, materials science, chemistry and life sciences in the materials engineering branch
In order to pursue a particular sequence, students must take the necessary science prerequisites in their first level of study. For details of major and minor sequences in science disciplines refer to the `Science areas of studies and sequences - Clayton' in the Faculty of Science section of this handbook. Students should contact the appropriate science or engineering course adviser before enrolling in any Level of the double degree program, to ensure that the program they wish to follow will satisfy prerequisites necessary for higher levels. In some special cases, students may choose to overload at Levels 2 or 3 if they have not completed all of the prerequisites for their chosen science major sequences.
Course requirements
Students must complete 240 points of units as listed for each branch below. The choice of either MTH1020 and MTH1030 or MTH1030 and MTH2010 in first level is determined by the level of preparation from VCE studies, and students who have not completed Level 12 Physics should take PHS1080 rather than PHS1011. See the Faculty of Science section of this handbook under 'Mathematics' for details of MTH1020 and MTH1030 and under `Physics' for details of PHS1011 and PHS1080.
Depending on the engineering stream, students in the double-degree must complete two major sequences in different science disciplines, or a double major and a minor sequence in a different science discipline, or a major and three minor sequences.
Students may graduate with a Bachelor of Science, or apply for admission to an honours level in science, following the completion of an approved combination of at least 144 points of units, including all of the normal science requirements for that branch of the Bachelor of Science/Bachelor of Engineering, with at least 96 points of science units and no more than 48 points of level 1 science units.
Should a student discontinue the double-degree program and seek to take out the Bachelor of Engineering, it will be necessary to complete all of the requirements of that single degree.
Chemical engineering
The engineering component requires not less than 132 points that must be obtained in units prescribed by this course list, and the science component requires no less than 108 points, including at least 24 points of level three science units.
Level 1 - Generic sequence
Select one pair of mathematics units from:
Select one pair of science units from:
- ASP1010 Earth to cosmos - introductory astronomy and ASP1022 Life and the universe
- BIO1011 Biology I and BIO1022 Biology II
- ESC1011 Planet earth and its environment: the cosmic connection and ESC1022 Planet earth: dynamic systems, environmental change and resources
- FIT1002 Computer programming and FIT1015 Computer science
- PHS1011 Physics (or PHS1080 Foundation physics) and PHS1022 Physics
- STA1010 Statistical methods for science and MTH1112 Numbers, logic and graphs
Level 1 - Major sequence in life sciences
Select one pair of mathematics units from:
Level 1 - Major sequence in chemistry with a minor sequence in life sciences
Select one pair of mathematics units from:
Total: 48 points
Level 2 - Generic sequence
- CHE2161 Fluid mechanics
- CHE2162 Material and energy balances
- CHE2163 Heat and mass transfer
- CHE2164 Thermodynamics I
- MTH2021 Linear algebra with applications
- MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at level 1)
- An approved 12 point science sequence
Level 2 - Major sequence in life sciences
- CHE2161 Fluid mechanics
- CHE2162 Material and energy balances
- CHE2163 Heat and mass transfer
- CHE2164 Thermodynamics I
- MTH2021 Linear algebra with applications
- MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at level 1)
Select one pair of units from:
- BCH2011 Structure and function of cellular biomolecules and BCH2022 Metabolic basis of human diseases
- MIC2011 Microbiology: the microbial world and MIC2022 Microbiology: host and environmental interactions
- MOL2011 Molecular biology: genes and their expression and MOL2022 Molecular biology: gene technology and its application
Level 2 - Major sequence in chemistry with a minor sequence in life sciences
- CHE2161 Fluid mechanics
- CHE2162 Material and energy balances
- CHE2163 Heat and mass transfer
- CHE2164 Thermodynamics I
- MTH2021 Linear algebra with applications
- MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at level 1)
- 12 points of approved science units towards a major sequence in chemistry
Total: 48 points
Level 3 - Generic sequence
- CHE3161 Chemistry and chemical thermodynamics
- CHE3162 Process control
- CHE3163 Sustainable processing I
- 6 point approved chemical engineering unit
- 24 points of approved science units to complete a major sequence in science
Level 3 - Major sequence in life sciences
- CHE3161 Chemistry and chemical thermodynamics
- CHE3162 Process control
- CHE3163 Sustainable processing I
- 6 point approved chemical engineering unit
- 12 points of approved science units towards a major sequence in biochemistry, microbiology or molecular biology
- 12 points of approved science units to complete a minor sequence in chemistry
Level 3 - Major sequence in chemistry with a minor sequence in life sciences
- BCH2011 Structure and function of cellular biomolecules
- BCH2022 Metabolic basis of human diseases
- CHE3161 Chemistry and chemical thermodynamics
- CHE3162 Process control
- CHE3163 Sustainable processing I
- 6 point approved chemical engineering unit
- 12 points of approved science units towards a major sequence in chemistry
Total: 48 points
Level 4 - Generic sequence
- CHE3164 Reaction engineering
- CHE3165 Separation processes
- CHE3166 Process design
- 6 point approved chemical engineering unit
- 24 points of approved science units to complete a second major sequence, or a double major sequence in science
Level 4 - Major sequence in life sciences
- CHE3164 Reaction engineering
- CHE3165 Separation processes
- CHE3166 Process design
- CHE3171 Bioprocess technology
- 12 points of approved science units to complete a major sequence in biochemistry, microbiology or molecular biology
- 12 points of approved science units to complete an additional minor sequence in science
Level 4 - Major sequence in chemistry with a minor sequence in life sciences
- CHE3164 Reaction engineering
- CHE3165 Separation processes
- CHE3166 Process design
- CHE3171 Bioprocess technology
- 12 points of approved science units to complete a major sequence in chemistry
- 12 points of approved science units to complete an additional minor sequence in science
Total: 48 points
Level 5 - Generic sequence
- CHE4161 Engineers in society
- CHE4162 Particle technology
- CHE4163 Transport phenomena and numerical methods
- CHE4170 Design project (12 points)
- CHE4180 Chemical engineering project (12 points)
- 6 point approved chemical engineering unit
Level 5 - Major sequence in life sciences
- CHE4161 Engineers in society
- CHE4162 Particle technology
- CHE4163 Transport phenomena and numerical methods
- CHE4170 Design project (12 points)
- CHE4180 Chemical engineering project (12 points)
- CHE4171 Biochemical engineering
Level 5 - Major sequence in chemistry with a minor sequence in life sciences
- CHE4161 Engineers in society
- CHE4162 Particle technology
- CHE4163 Transport phenomena and numerical methods
- CHE4170 Design project (12 points)
- CHE4180 Chemical engineering project (12 points)
- CHE4171 Biochemical engineering
Total: 48 points
Civil engineering
The engineering component requires not less than 132 points that must be obtained in units prescribed by this course list and the science component requires at least 108 points.
Level 1
Select one pair of mathematics units from:
Select one pair of science units from:
- ASP1010 Earth to cosmos - introductory astronomy and ASP1022 Life and the universe
- BIO1011 Biology I and BIO1022 Biology II
- CHM1011 Chemistry and CHM1022 Chemistry
- ESC1011 Planet earth and its environment: the cosmic connection, and ESC1022 Planet earth: dynamic systems, environmental change and resources
- FIT1002 Computer programming and FIT1015 Computer science
- STA1010 Statistical methods for science and MTH1112 Numbers, logic and graphs
Total: 48 points
Level 2
- CIV2206 Mechanics of solids
- CIV2226 Design of concrete and masonry structures
- CIV2242 Introductory geoengineering
- ENG1060 Computing for engineers
- MTH2021 Linear algebra with applications
- MTH2032 Differential equations with modelling
- 12 points of approved science units including MTH2010 if that was not taken at level 1
Total: 48 points
Level 3
- 24 points of approved science units to complete a major sequence in science*
Select 24 points of engineering units from:
- CIV2207 Computing and water systems modelling
- CIV2225 Design of steel and timber structures
- CIV2263 Water systems
- CIV2282 Transport and traffic engineering
- CIV3204 Engineering investigation
- CIV3205 Project management for civil engineers
- CIV3221 Building structures and technology
- CIV3222 Bridge design and assessment
- CIV3247 Geoengineering
- CIV3248 Groundwater and environmental geoengineering
- CIV3264 Urban water and wastewater systems
- CIV3283 Road engineering
Total: 48 points
Level 4
- A further 24 points of CIV units chosen from `Level 3' above
- 24 points of approved science units to complete a second major sequence, or a double major sequence, in science*
Total: 48 points
Level 5
- CIV4210 Project I
- CIV4212 Civil engineering practice 4
- 12 points of level 4 civil engineering electives
- Select the remaining 24 points of CIV units chosen from `Level 3' above
Total: 48 points
Electrical and computer systems engineering
The generic and the computer science streams of the engineering component require not less than 132 points that must be obtained in units prescribed by this course list and the science component requires at least 108 points. Students must also complete either two majors or a double major and a minor in different science disciplines. The physiology/biomedical engineering stream requires 156 points of engineering and 84 points of science.
If FIT1002 and FIT1015 are completed in first level, you do not need to take ECE2071 Computer organisation and programming. It is recommended that you take ECE2061 Linear electronics in second level, ECE3073 in third level and an additional elective in fourth level.
Level 1 - All sequences
Select one pair of mathematics units from:
Select one pair of science units from:
- ASP1010 Earth to cosmos - introductory astronomy and ASP1022 Life and the universe
- BIO1011 Biology I and BIO1022 Biology II
- CHM1011 Chemistry and CHM1022 Chemistry
- ESC1011 Planet earth and its environment: the cosmic connection, and ESC1022 Planet earth: dynamic systems, environmental change and resources
- FIT1002 Computer programming and FIT1015 Computer science
- STA1010 Statistical methods for science and MTH1112 Numbers, logic and graphs
Total: 48 points
Level 2 - Generic sequence
- ECE2011 Signal processing
- ECE2071 Computer organisation and programming, or ECE2061 Linear electronics (if FIT1002/1015 or CSE1301/1303 taken at level 1)
- ECE2072 Digital systems
- ENG2092 Advanced engineering mathematics B
- MTH2021 Linear algebra with applications
- MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at level 1)
- PHS2011 Physics: quantum concepts and technologies
- PHS2022 Physics for communications and measurement
Level 2 - Computer science sequence
- ECE2011 Signal processing
- ECE2061 Linear electronics
- ECE2072 Digital systems
- ENG2092 Advanced engineering mathematics B
- FIT2004 Algorithms and data structures
- FIT2014 Theory of computation
- MTH2021 Linear algebra with applications
- MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at level 1)
Level 2 - Physiology/biomedical sequence
- ECE2011 Signal processing
- ECE2071 Computer organisation and programming, or ECE2061 Linear electronics (if FIT1002/1015 or CSE1301/1303 taken at level 1)
- ECE2072 Digital systems
- ENG2092 Advanced engineering mathematics B
- MTH2021 Linear algebra with applications
- MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at level 1)
Select any two units from:
- PHY2011 Neuroscience of sensation, brain and movement
- PHY2021 Body systems physiology
- PHY2032 Physiology of human health
Total: 48 points
Level 3 - Generic sequence
- ECE2041 Telecommunications
- ECE2061 Linear electronics, or ECE3073 Computer systems (if FIT1002/1015 or CSE1301/1303 taken at level 1)
- ECE2062 Switching electronics
- ECE3022 Wireless and guided EM
- 24 points of approved science units to complete a major sequence in science
Level 3 - Computer science sequence
- ECE2021 Electromagnetism
- ECE2041 Telecommunications
- ECE2062 Switching electronics
- ECE3073 Computer systems
- 24 points of computer science units to complete a major sequence in computer science, including CSE2303**
Level 3 - Physiology/biomedical sequence
Select any four units from:
- PHY3012 Integrative neuroscience
- PHY3072 Muscle and exercise
- PHY3082 Development physiology
- PHY3111 Sensation and movement
- PHY3171 Clinical and experimental cardiovascular physiology
- PHY3181 Sex, reproduction and society
Total: 48 points
Level 4 - Generic sequence
- ECE3073 Computer systems or one 6-point elective from the ECSE elective units coded ECExxxx (if ECE3073 already taken)
- ECE3091 Engineering design
- ECE3092 Systems engineering and reliability analysis
- one 6-point elective from the ECSE elective units coded ECExxxx
- 24 points of approved science units to complete a major sequence in science
Level 4 - Computer science sequence
- ECE3022 Wireless and guided EM
- ECE3091 Engineering design
- ECE3092 Systems engineering and reliability analysis
- ECE3093 Optimisation estimation and numerical methods
- 24 points of approved science units to complete either a major sequence in mathematics or a double major sequence in computer science
Level 4 - Physiology/biomedical sequence
- ECE3022 Wireless and guided EM
- ECE3073 Computer systems (or one 6-point elective from the ECSE elective unit coded ECExxxx if ECE3703 already taken)
- ECE3091 Engineering design
- ECE3092 Systems engineering and reliability analysis
- ENG3093 Optimisation estimation and numerical methods
- one 6-point elective from the ECSE elective units coded ECExxxx
Select two biomedical units from:
Total: 48 points
Level 5 - Generic sequence
- ECE3031 Control
- ECE3093 Optimisation estimation and numerical methods
- ECE4094 Project A
- ECE4095 Project B
- ECE4099 Professional practice
- 18 points from the ECSE elective units coded ECExxxx
Level 5 - Computer science sequence
Level 5 - Physiology/biomedical sequence
Select the remaining two biomedical units from:
Total: 48 points
Materials engineering
The engineering component requires not less than 108 points that must be obtained in units prescribed by this course list and the science component requires at least 108 points and up to 132 points, depending on the stream. Students must also complete either two majors or a double major and a minor in two different science disciplines.
The engineering component requires not less than 108 or 132 points that must be obtained in units prescribed by this course list and the science component requires at least 132 or 108 points for materials science major sequence and generic sequence, respectively.
Level 1
Select one unit from:
Select one pair of science units from:
Select one pair of mathematics units from:
Select one additional pair of science units from:
- ASP1010 Earth to cosmos - introductory astronomy and ASP1022 Life and the universe
- BIO1011 Biology I and BIO1022 Biology II
- CHM1011 Chemistry and CHM1022 Chemistry (if this pair is has not already been taken)
- ESC1011 Planet earth and its environment: the cosmic connection and ESC1022 Planet earth: dynamic systems, environmental change and resources
- FIT1002 Computer programming and FIT1015 Computer science
- PHS1011 Physics (or PHS1080 Foundation physics) and PHS1022 Physics(if this pair is has not already been taken)
- STA1010 Statistical methods for science and MTH1112 Numbers, logic and graphs
Total: 48 points
Level 2 - Generic sequence
- MTE2541 Nanostructure of materials
- MTE2542 Microstructural development
- MTE2544 Functional materials
- MTE2545 Engineering materials I
- MTH2021 Linear algebra with applications
- MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at Level 1)
- a 12 point second level sequence chosen from physics, chemistry, astronomy, computer sciences or life sciences (including physiology)
Level 2 - Major sequence in materials science
- MSC2011 Nanostructure of materials and
- MSC2122 Microstructural development
- MTH2021 Linear algebra with applications
- MTH2032 Differential equations with modelling
- 24 points of science units, including MTH2010 (if not taken at level 1)
Total: 48 points
Level 3 - Generic sequence
- MTE2543 Materials selection and design
- MTE2546 Mechanics of materials
- MTE3541 Materials durability
- MTE3545 Functional materials and devices
- 24 points of approved science units to complete a first major sequence in science*
Level 3 - Major sequence in materials science
- 24 points of approved science units to complete a second major sequence in science*
Select 24 points from:
- MSC2111 Functional materials
- MSC3111 Materials durability
- MSC3121 Microstructural design in structural materials
- MSC3132 Functional materials and devices
- MSC3142 Materials characteristics and modelling
Total: 48 points
Level 4 - Generic sequence
- MTE3542 Microstructural design in structural materials
- 18 points of level 3 core units from the Bachelor of Engineering in the field of materials engineering
- 24 points of approved science units to complete a second major sequence in science* or a double major sequence in mathematics or chemistry
Level 4 - Major sequence in materials science
- MTE2543 Materials selection and design
- MTE2545 Engineering materials I
- MTE2546 Mechanics of materials
- MTE3543 Microstructure to applications: the mechanics of materials
- MTE3544 Management and practice in materials engineering
- MTE3546 Engineering materials II
Plus one of:
- MTE2544 Functional materials
- MTE3541 Materials durability
- MTE3542 Microstructural design in structural materials
- MTE3545 Functional materials and devices
- MTE3547 Materials characterisation and modelling (for which equivalent materials science unit was not taken before)
- one 6-point elective in materials engineering
Total: 48 points
Level 5 - Generic sequence
- MTE4525 Project I
- MTE4526 Project II
- MTE4571 Materials engineering design and practice
- MTE4572 Polymer/composite processing and engineering
- MTE4573 Processing and engineering of metals and ceramics
- remaining 6 point third level materials engineering core unit
- 12 points of level 4 materials engineering electives
Level 5 - Major sequence in materials science
- MTE4525 Project I
- MTE4526 Project II
- MTE4571 Materials engineering design and practice
- MTE4572 Polymer/composite processing and engineering
- MTE4573 Processing and engineering of metals and ceramics
- 18 points of electives in materials engineering (students taking the biomaterials sequence can choose relevant electives and a project)
Total: 48 points
Mechanical engineering
The engineering component requires not less than 132 points that must be obtained in units prescribed by this course list, and the science component requires at least 108 points.
Level 1
Select one pair of mathematics units from:
Select one pair of science units from:
- ASP1010 Earth to cosmos - introductory astronomy and ASP1022 Life and the universe
- BIO1011 Biology I and BIO1022 Biology II
- CHM1011 Chemistry and CHM1022 Chemistry
- ESC1011 Planet earth and its environment: the cosmic connection and ESC1022 Planet earth: dynamic systems, environmental change and resources
- FIT1002 Computer programming and FIT1015 Computer science
- STA1010 Statistical methods for science and MTH1112 Numbers, logic and graphs
Total: 48 points
Level 2
- MEC2401 Dynamics I
- MEC2402 Engineering design I
- MEC2404 Fluid mechanics I
- MEC2406 Engineering design II
- MTH2021 Linear algebra with applications
- MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at level 1)
- PHS2011 Physics: quantum concepts and technologies
- PHS2022 Physics for communications and measurement
Total: 48 points
Level 3
- MEC2403 Mechanics of materials
- MEC2405 Thermodynamics
- 12 points of level 3 units from the Bachelor of Engineering in the field of mechanical engineering
- 24 points of approved science units to complete a major sequence in mathematics
Total: 48 points
Level 4
- 24 points of level 3 units from the Bachelor of Engineering in the field of mechanical engineering
- 24 points of approved science units to complete a second major sequence in science* or a double major sequence in mathematics
Total: 48 points
Level 5
- up to 6 points of level 3 units from the Bachelor of Engineering in the field of mechanical engineering
- at least 42 points from level 4 units from the Bachelor of Engineering in the field of mechanical engineering including MEC4401, MEC4402 and either MEC4403 or an approved inter-faculty elective
Total: 48 points
Mechatronics engineering
The engineering component requires not less than 132 points that must be obtained in units prescribed by this course list, and the science component requires at least 108 points. Students must also complete either two majors or a double major and a minor in two different science disciplines.
This branch ceased intake into level 2 at the end of 2005. Students seeking to combine science with mechatronics engineering should consider applying for a course transfer into the new Bachelor of Mechatronics Engineering and Bachelor of Science double-degree program.
Level 1 All sequences
Select one pair of mathematics units from:
Select one pair of science units from:
- ASP1010 Earth to cosmos - introductory astronomy, and ASP1022 Life and the universe
- BIO1011 Biology I, and BIO1022 Biology II
- CHM1011 Chemistry, and CHM1022 Chemistry
- ESC1011 Planet earth and its environment: the cosmic connection, and ESC1022 Planet earth: dynamic systems, environmental change and resources
- FIT1002 Computer programming, and FIT1015 Computer science
- STA1010 Statistical methods for science, and MTH1112 Numbers, logic and graphs
Total: 48 points
Level 2 - Generic sequence
- ENG2092 Advanced engineering mathematics B
- MTH2021 Linear algebra with applications
- MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at level 1)
- PHS2011 Physics: quantum concepts and technologies
- PHS2022 Physics for communications and measurement
- TRC2100 Mechatronic design
- TRC2300 Digital electronics
- TRC2400 Computer programming (or elective if FIT1002 taken)
Level 2 - Computer science sequence
- ENG2092 Advanced engineering mathematics B
- FIT2004 Algorithms and data structures
- FIT2014 Theory of computation
- MTH2021 Linear algebra with applications
- MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at level 1)
- TRC2100 Mechatronic design
- TRC2300 Digital electronics
- TRC2400 Computer programming (or elective if FIT1002 taken)
Total: 48 points
Level 3 - Generic sequence
- TRC2000 Mechatronics project I
- TRC2200 Thermo-fluids and power systems
- TRC2201 Mechanics
- TRC2500 Electronics
- 24 points of approved science units to complete a major sequence in science*
Level 3 - Computer science sequence
- TRC2000 Mechatronics project I
- TRC2200 Thermo-fluids and power systems
- TRC2201 Mechanics
- TRC2500 Electronics
- 24 points of computer science units to complete a major sequence in computer science, including CSE2303**
Total: 48 points
Level 4 - Generic sequence
- TRC3000 Mechatronics project II
- TRC3300 Microprocessor systems
- TRC3500 Sensors and artificial perception
- TRC3801 Mechatronics and manufacturing
- 24 points of approved science units to complete a major sequence in science*
Level 4 - Computer science sequence
- TRC3000 Mechatronics project II
- TRC3300 Microprocessor systems
- TRC3500 Sensors and artificial perception
- TRC3801 Mechatronics and manufacturing
- 24 points of approved science units to complete either a major sequence in mathematics or a double major sequence in computer science
Total: 48 points
Level 5 - Generic sequence
Level 5 - Computer science sequence
Total: 48 points
* Any sequence in science may be taken, provided the appropriate sequence requirements and prerequisites are completed. In some cases, students may elect to seek approval for an overloaded course of up to 12 points at level 2 or 3 to enable these requirements to be completed in addition to the required science units at level 2.
** Students considering entry to honours in computer science need to complete at least 24 points of level 3 computer science units, which may require an overloaded course to be approved if a double major in computer science is not completed at level 4.
Contact details
Telephone +61 3 9905 3404, email eng.info@eng.monash.edu.au or visit http://www.eng.monash.edu.au
Course adviser
Visit http://www.eng.monash.edu.au/current-students/course-information.html#1
| 
