Monash University Handbook 2011 Undergraduate - Units

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Foundation Studio introduces architectural design as a process of investigation, critical observation, and experiment. The unit focuses on design as a process engaged with the three-dimensional and material testing of ideas. Projects will be formulated to introduce issues such as scale in relation to the human body, site and environmental contexts, basic techniques of three-dimensional composition and the correct use of architectural drawing conventions.

Objectives

On successful completion of this unit, students will:

1. Demonstrate a progression to a basic level of competence in architectural design.
2. Have the ability to undertake basic analysis and respond appropriately to a straight-forward brief.
3. Have developed a basic understanding of how observation, analysis, experiment and critique apply to the architectural design process.
4. Have acquired a basic range of skills in verbal, graphic and 3-dimensional presentation
5. Have acquired a basic range of skills in 3-dimensional and material testing of ideas
6. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study

Assessment

100% Mixed Mode

Chief examiner(s)

Ross Brewin

Contact hours

8 hours studio per week or equivalent and 16 hours of independent study.

Co-requisites

OHS1000.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Building on the basic architectural knowledge and skills attained in Architecture Design Studio 1, this unit introduces students to a further level of complexity in the processes of investigation, critical observation, and experiment. The synthesis of a range of complex issues inherent in the production of architecture: material, structure, program, site, history and representation is further investigated in relationship to the production of architectural form.
Architecture Design Studio 2 further emphasizes the development of architectural designs through the three-dimensional and material testing of ideas. Students will continue the development of two and three-dimensional modes of representation. Studies will focus on developing a more nuanced understanding of design as a visual language and process of cultural production with a focus on social and environmental sustainability.

Objectives

On successful completion of this unit, students will:

1. Demonstrate a basic level of competence in architectural design.
2. Have the ability to undertake a level of complex analysis and respond appropriately to a brief.
3. Have refined their understanding of how observation, analysis, experiment and critique apply to the architectural design process.
4. Have acquired a range of skills in verbal, graphic and 3-dimensional presentation.
5. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

100% Mixed Mode

Chief examiner(s)

Ross Brewin

Contact hours

24 hours per week, including 6 hours studio or equivalent and 18 hours of independent study

Prerequisites

ARC1001 and OHS1000

Co-requisites

ARC1102

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Delivered in conjunction with ARC1002. Explores materials, component systems, products and fabrication systems as they apply to building construction. This includes the study of materials in terms of their physical and chemical properties, environmental sustainability and impact, and involves physical testing and assessment of materials and their application in architecture.

Objectives

On successful completion of this unit, students will:

1. Understand the basic use and properties of materials and fabrication techniques as they apply to architectural design;
2. Be familiar with historic and contemporary development of construction materials, component systems and fabrication techniques;
3. Understand basic physical and structural principles as they pertain to different materials;
4. Understand issues of environmental sustainability in relation to materials selection and design;
5. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

100% Mix mode

Chief examiner(s)

John Sadar

Contact hours

12 hours, including 3 hours of lecture/workshop and 9 hours of independent study

Co-requisites

ARC1002

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Explores the principles, history and methods of perspective and orthographic projection, and engages in the practice of descriptive geometry through the use of contemporary computer technology and computer aided drafting (CAD). Basic techniques of visualisation and the translation of traditional analogue modes of representation into the digital will be introduced, along with technical CAD modelling and drawing skills in both two and three-dimensions.

Objectives

On successful completion of this unit, students will:

1. Be aware of the function of computer aided drafting (CAD) as a fundamental tool of two and three-dimensional design;
2. Understand the transition between two-dimensional and three-dimensional systems of representation and their associated drawing conventions;
3. Have developed basic skills in computer aided drawing in two and three dimensions using industry standard hardware / software;
4. Understand the principles of descriptive geometry, its methods of representation and protocols of orthographic and axonometric projection;
5. Have basic knowledge of the theoretical and historical origins of perspective and orthographic projection as an analogue form of practice and representation; 6. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

100% Mixed mode

Chief examiner(s)

Tim Shork

Contact hours

4 hours

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces visual and spatial language, especially in architecture, and its derivation from ritual, symbols, materials, technique and modes of construction. Visual and spatial language is analysed in relation to technical, aesthetic, spiritual and ideological frameworks. Through an examination of selected monuments produced in diverse periods, from historical epochs to the contemporary, architecture is considered in relation to the human body and proportion, real and virtual environments, and the city.

Objectives

On successful completion of this subject, students should have developed:
1.A basic appreciation of architectural history and theory as modes of critical thinking, relevant and applicable to contemporary architectural design and discourse 2.A basic understanding of architectural history and theory as interrelated disciplines 3. Basic knowledge of key historical epochs in architecture as they relate to theoretical themes and cultural contexts 4. Basic knowledge of key theoretical themes as they relate to architecture within historic contexts

Assessment

Written assignments and slide test

Chief examiner(s)

Melissa Miles

Contact hours

2 hour lecture and 1 hour tutorial

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Architecture Design Studio 3 further refines the process of investigation, critical observation, and experiment integral to architectural practice. Continuing the emphasis on perceptive synthesis of the range of complex issues inherent in the production of architecture: material, structure, program, site, history and representation will be investigated in their relationship to the production of architectural form.
Design Studio 3 continues to emphasise the development of architectural designs through the three-dimensional and material testing of ideas. Students will continue the development of two and three-dimensional modes of representation. Studies will focus on developing an increasingly sophisticated understanding of design as a visual language and process of cultural production with a focus on social and environmental sustainability.

Objectives

On successful completion of this unit, students will:

1. Demonstrate a progression to an intermediate level of competence in architectural design.
2. Have the ability to critically analyse and respond appropriately to a brief.
3. Have developed a competent understanding of how observation, analysis, experiment and critique apply to the architectural design process.
4. Have acquired an intermediate level of competence in a range of skills in verbal, graphic and 3-dimensional presentation.
5. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

100% mixed mode

Chief examiner(s)

Ari Seligmann

Contact hours

24 hours per week including 6 contact hours per week and 18 hours of independent study or equivalent

Prerequisites

ARC1002, OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Architecture Design Studio 4 continues to expand on the conceptual understanding and skill base of preceding design studios. The unit elaborates on architectural design as a process of investigation, critical observation, and experiment. It increases the emphasis on design as a synthetic process encompassing a range of complex issues inherent in the production of architecture: material, structure, program, site, history and representation are investigated in their relationship to the production of architectural form.
Architecture Design Studio 4 continues to enhance the development of architectural designs through the three-dimensional and material testing of ideas. Studies in the unit will maintain their focus on developing an understanding of design as a visual language and process of cultural production with a focus on social and environmental sustainability.

Objectives

On successful completion of this unit, students will:

1. Demonstrate an intermediate level of competence in architectural design.
2. Have the ability to critically analyse and respond appropriately to a compound brief.
3. Have developed a competent understanding of how observation, analysis, experiment and critique apply to the architectural design process.
4. Have acquired an intermediate level of competence in a range of skills in verbal, graphic and 3-dimensional presentation.
5. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

100% mixed mode

Chief examiner(s)

Tim Schork

Contact hours

24 hours per week including 6 contact hours per week and 18 hours of independent study or equivalent.

Prerequisites

ARC2001, OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit explores structure as it relates to architectural design and construction. This includes study of structural principles and the implications of these in relation to architectural design and construction processes and outcomes. Direct physical testing and manipulation of materials and structural systems will be used to understand and assess their application in architecture. A range of structural behaviors will be addressed in response to optimisation and material efficiencies as well as their relationship to design intent. Projects will be introduced to promote dialogue between this unit and design studio project processes and outcomes. Integral to the subject matter is the engagement with strategies for environmental sustainability in relation to structure design and construction.

Objectives

On successful completion of this unit, students will:

1. Understand basic structural principles as they apply to architectural design and construction
2. Understand issues of material properties and construction processes in relation to structural system design
3. Develop an understanding of issues of environmental sustainability in relation to structural system design
4. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study

Assessment

100% mixed mode

Chief examiner(s)

John Sadar

Contact hours

12 hours per week, including 3 hours lecture / tutorial and 9 hours of independent study or equivalent

Prerequisites

ARC1102, OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit focuses on the development of communication skills and understanding of conceptual, historical and ideological concerns which relate to 2 and 3 dimensional modes of representation. Examining the relationship between 2dimensional modes of representation and 3 dimensional material and physical outcomes is a primary focus. Two related themes are explored: methods of digital image production, including visualisation and rendering; and processes of material production and fabrication.

Objectives

On successful completion of this unit, students will:

1. Demonstrate basic skills and understanding of material fabrication techniques;
2. Demonstrate basic skills in digital rendering of 3-dimensional CAD models (using industry standard hardware / software) and the associated use of post-production software (such as the Adobe suite for example);
3. Have developed a basic understanding of the transition between abstract 2-dimensional modes of representation and applied three-dimensional physical outcomes;
4. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

100% mixed mode

Chief examiner(s)

Tim Schork

Contact hours

12 hours per week, including 3 hours lecture/tutorial and 9 hours of independent study, or equivalent

Prerequisites

ARC1301, OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces the history and theory of selected Australian and international architecture since 1968.The unit will also introduce methods for the written, spoken and visual analysis of buildings including site visits, analytical case studies and other forms of analysis. In addition to the theoretical and historical contexts of the buildings studied the unit will investigate their contribution to architectural design.

Objectives

On successful completion of this unit, students will have developed:

1. A basic knowledge of the history and theory of post 1968 architecture;
2. A basic knowledge of the varied contexts of post 1968 architecture;
3. Ability to demonstrate a basic understanding of techniques applicable to the visual analysis of architecture;
4. A basic understanding of the selected buildings' contribution to architectural design;
5. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

The Analytical Project, Essay and Visual Test will together form 100% of the assessment.

Chief examiner(s)

Ari Seligmann

Contact hours

A range of lectures, seminars, intensives and site visits delivered in regular and or intensive mode averaging the equivalent of 12 hours work per week, including 3 hours contact and 9 hours of independent study.

Prerequisites

ARC1401

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces the history and theory of 19th and 20th century Australian and international architecture. The subject will also develop methods for the written, discursive and visual analysis of buildings including site visits, analytical case studies and other forms of analysis. In addition to the theoretical and historical contexts of the buildings studied the subject will investigate their contribution to architectural design.

Objectives

On successful completion of this unit, students will have developed:

1. Knowledge of the history and theory of 19th and 20th century Australian and international architecture.
2. Knowledge of the varied contexts of 19th and 20th century Australian and international architecture.
3. Ability to demonstrate familiarity the techniques applicable to the visual analysis of architecture.
4. An understanding of the selected buildings' contribution to architectural design.
5. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

The Analytical Project, Essay and Visual Test will together form 100% of the assessment.

Chief examiner(s)

Karen Burns

Contact hours

3 contact hours per week or equivalent

Prerequisites

Must have passed ARC2401

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Architecture Design Studio 5 continues to expand and consolidate the conceptual understanding and skill base of preceding design studios. It continues to elaborate on architectural design as a process of investigation, critical observation, and experiment. It increases the emphasis on design as a synthetic process encompassing a range of complex issues inherent in the production of architecture: material, structure, program, site, history and representation are investigated in their relationship to the production of architectural form.
Architecture Design Studio 5 continues the development of architectural designs through the consolidation of three-dimensional and material testing of ideas. Studies in the unit will maintain a focus on developing design as a visual language and process of cultural production with an emphasis on social and environmental sustainability

Objectives

On successful completion of this unit, students will:

1. Demonstrate a progression to a refined level of competence in architectural design.
2. Have the ability to critically analyse and successfully respond the complex range of issues inherent in an architectural design project.
3. Have developed a sophisticated understanding of how observation, analysis, experiment and critique apply to the architectural design process.
4. Have acquired an advanced level of competence and consolidation of all presentation skills: verbal, graphic and 3-dimensional.
5. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

100% Mixed mode

Chief examiner(s)

Ari Seligmann

Contact hours

24 hours a week, including 6 Studio hours or equivalent and 18 hours of independent study

Prerequisites

ARC2002

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Architecture Design Studio 6 aims to consolidate the conceptual understanding and skill base of preceding design studios. It continues to elaborate on architectural design as a process of investigation, critical observation, and experiment. It increases the emphasis on design as a synthetic process encompassing a range of complex issues inherent in the production of architecture: material, structure, program, site, history and representation are investigated in their relationship to the production of architectural form.
Architecture Design Studio 6 continues the development of architectural designs through the further consolidation of three-dimensional and material testing of ideas. Studies in the unit will maintain a focus on developing design as a visual language and process of cultural production with an emphasis on social and environmental sustainability.

Objectives

On successful completion of this unit, students will:

1. Demonstrate a refined level of competence in architectural design.
2. Have a demonstrated ability to critically analyse and successfully respond the complex range of issues inherent in an architectural design project.
3. Have developed a sophisticated understanding of how observation, analysis, experiment and critique apply to the architectural design process.
4. Have acquired an advanced level of competence and consolidation of all presentation skills: verbal, graphic and 3-dimensional.
5. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

100% Mixed mode

Chief examiner(s)

Ari Seligmann

Contact hours

24 hours, including 6 Studio hours or equivalent and 18 hours of independent study

Prerequisites

ARC3001

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit explores environmental systems as they relate to architectural design and construction. This includes study of environmental design principles and the implications of these in relation to architectural design and construction processes and outcomes. Analysis of environmental systems will be conducted with a focus on the relationship to design intent. A range of environmental behaviors will be addressed in response to performance optimisation. Integral to the subject matter is the engagement with strategies for environmental sustainability in relation to architectural design and construction. Projects will be introduced to promote dialogue between this unit and Architecture Design Studio 6 project processes and outcomes.

Objectives

On successful completion of this unit, students will:

1. Demonstrate a basic understanding of environmental design principles as they apply to architectural design and construction,
2. Understand issues of material properties and construction processes in relation to environmental system design,
3. Have developed a competent understanding of issues of environmental sustainability in relation to architectural design,
4. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

100% Mixed mode

Chief examiner(s)

John Sadar

Contact hours

12 hours, including 3 hours of lectures and tutorials and 9 hours of independent study

Prerequisites

ARC2101

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces the history and theory of contemporary urbanism. The subject will also develop methods for the written, spoken and visual analysis of urban settings and their associated architecture including site visits, analytical case studies and other forms of analysis. In addition to the theoretical and historical contexts of the urban settings and associated architecture the subject will investigate their contribution to architectural design knowledge.

Objectives

On successful completion of this unit, students will have developed:

1. Knowledge of the history and theory of contemporary urbanism.
2. Knowledge of the socio economic, political and cultural contexts of selected contemporary cities.
3. Ability to demonstrate the techniques applicable to the visual analysis of urban settings and their associated architecture.
4. An understanding of the selected urban settings and their associated architecture's contribution to architectural design in an urban context.
5. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

The Analytical Project, Essay and Visual Test will together form 100% of the assessment.

Chief examiner(s)

Ari Seligman

Contact hours

12 hours, including 3 hours of lectures, seminars or equivalent and 9 hours of independent study

Prerequisites

ARC2402

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to the practice and theory of ceramics as a means of contemporary creative expression. It focuses on raising awareness of and providing the means to achieve an initial level of competence within the ceramics discipline, while imparting a sound conceptual and technical basis for continuing study in that discipline. The safe handling of materials and equipment is emphasized as an essential part of all studio practice.

Objectives

On successful completion of this unit, students should be able to:

1. demonstrate competence in basic design principles and be able to apply them in the practice of the Ceramics discipline;
2. understand a variety of production methods used in the studio environment, have an appreciation of the nature of various media, their properties and uses, and be able to work with materials and techniques in an imaginative and engaging manner;
3. have formed an understanding of relevant terminology commonly used in the Ceramics discipline;
4. show they can initiate, develop and express personal aesthetic solutions in the medium of choice;
5. demonstrate an understanding of the synthesis between concept, design solution, process and Ceramics production;
6. be able to present their work to an audience with theoretical and historical rationale;
7. have an appreciation and understanding of the required organisation and management of individual workspaces and consideration of others in the studio environment;
8. have formed a growing awareness of the contemporary and historical context of the chosen Ceramics discipline and the role of the artist/designer in the community;
9. possess the knowledge and ability to achieve safe working practices in the activities of the Ceramics studio.

Assessment

Folio of studio work:100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

George Aslanis

Contact hours

12 hours per week, including four hours of taught studio and eight hours of personal study and studio practice

Prerequisites

Admission to an Art & Design course or permission

Co-requisites

OHS1000

Prohibitions

APA1101, or APA111, or APA1122, or APA1202, or APA1212, or APA1213

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit gives students the opportunity to further develop the ideas concepts, materials and processes begun in the corresponding Ceramics 1A unit. Students will begin to establish an individual and self directed practice within the broad parameters of the ceramics discipline. Methods and materials specific to the ceramics studio discipline will be demonstrated and practiced. Students will be encouraged to develop appropriate links between these methods and other means of creative self-expression. Set projects will require students to develop technical skills hand in hand with their understanding of concepts of current relevance.

Objectives

On successful completion of this unit, student should be able to:

1. have acquired a more discerning and critical awareness in relation to design, selection of materials, working techniques, and conceptual development associated with set exercises and self-generated projects;
2. have increased technical and aesthetic fluency, and begin to initiate, develop and express personal aesthetic solutions in the medium of choice;
3. demonstrate an initial grasp of the importance of research to art practice;
4. be able to present their work in critique sessions with growing confidence as to its theoretical and historical rationale;
5. gain confidence in their ability to communicate (in oral, written and visual form) responses to contemporary issues of both technical and conceptual relevance;
6. understand and apply the principles of occupational health and safety practices in the Ceramics studio, and be able to collaborate and co-operate safety and productively within the studio environment.

Assessment

Folio of studio work:100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

George Aslanis

Contact hours

12 hours per week, including four hours of taught studio and eight hours of personal study and studio practice

Prerequisites

Admission to an Art & Design course or permission

Co-requisites

OHS1000

Prohibitions

APA1102, or APA1112, or APA1214

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

The Ceramics 3A unit provides a rigorous program to broaden students' awareness of concepts and techniques across a range of approaches, and encourages them to seek appropriate solutions. Continued research and investigation of materials and processes fosters the acquisition of technical language, and influences appropriate choices to realize concepts within the context of a developing personal visual language. Set projects still occur but the emphasis is on self-motivated approaches. Teaching methods therefore tend to concentrate on individual tuition and group critique. Emphasis is placed on students' continued capacity to critically assess their own work as well as that of their peers.

Objectives

On successful completion of this unit, student should be able to:

1. develop a questioning awareness of practical aesthetic and technical systems or theories and the skills related to them;
2. possess considerable manipulative skills in their chosen area of self expression;
3. have enhanced perceptual skills and critical sensibility necessary for the development of a personal visual language;
4. develop their own conceptual and expressive strengths in relation to historical and current visual art practices;
5. be familiar with current issues in at least one discipline of ceramics and recognise the potential to produce works within the framework of contemporary culture;
6. be able to apply the elements and principles of design to a broad range of design studio situations and objectively analyse and synthesise design options within a ceramics context;
7. demonstrate effective communication skills and be able to share their work through well-researched class papers and competent critiques of the work of oneself and of other artists;
8. understand and practise the rules of occupational health and safety in force in the ceramics studio, and be able to collaborate and co-operate safely and productively within the studio environment.

Assessment

Folio of studio work:100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

George Aslanis

Contact hours

12 hours per week, including four hours of taught studio and eight hours of personal study and studio practice.

Prerequisites

Either CER1111 or CER1112 or VIS1101 or VIS1112 or APA1101 or APA1102 or APA1112 or APA1122 or APA1211 or APA1212 or APA1213

Co-requisites

OHS1000

Prohibitions

APA2103 or APA2211 or APA2202

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

In each Ceramics 4A unit students become increasingly responsible for the delivery of their major study program, with emphasis placed on independent investigation, and the development of the creative and expressive potential inherent in students' work. This, combined with staff consultation, starts to determine students' focuses for future ceramics studio work. The emphasis shifts away from set projects towards self-motivated practice and research through which students articulate their conceptual and expressive strengths. Studio practice is still exploratory but with better grasp of theoretical issues relevant to students' practices.

Objectives

On successful completion of this unit, student should:

1. have extended both their skills in art making and their vocabulary of materials and Ceramics studio processes;
2. be able to select and develop a methodology for realizing a self-directed practice, and the commitment to rigorous work practice;
3. have developed levels of experimentation and investigation within their work, moving towards a focus on specific themes and technologies;
4. continue developing their own technical, iconographic and conceptual concerns, and have an understanding of the critical, conceptual and theoretical issues surrounding contemporary Ceramics;
5. demonstrate a capability for managing a project from idea, to selection of appropriate materials and processes, to drawing up a time-line and to presentation of the finished work;
6. have developed a capacity for self-appraisal of their own work, and provide constructive critique of the work of others, and be able to articulate this through oral presentations and written documentation;
7. understand and practice the rules of occupational health and safety in force in the Ceramics studio, and be able to collaborate and co-operate safely and productively within the studio environment.

Assessment

Folio of studio work:100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

George Aslanis

Contact hours

12 hours per week, including four hours of taught studio and eight hours of personal study and studio practice

Prerequisites

Either CER1111 or CER1112 or VIS1111 or VIS1112 or APA1111 or APA1112

Co-requisites

OHS1000

Prohibitions

APA2104,APA2212

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This Ceramics 3B unit extends the rigorous program to broaden students' awareness of concepts and techniques across a range of approaches, and further encourage them to seek appropriate solutions. Continued research and investigation of materials and processes fosters the acquisition of technical language, and influences appropriate choices to realise concepts within the context of a developing personal visual language. The emphasis is more on self-motivated approaches than on set projects. Teaching methods therefore tend to concentrate on individual tuition and group critique. This unit continues to focus on the nexus between art making and the cultural and social contexts of art.

Objectives

On succesfull competion of this unit, student will:

1. develop further their awareness of practical aesthetic and technical systems or theories and the skills related to them;
2. possess superior manipulative skills in their chosen area of self expression;
3. have increased their perceptual skills and critical sensibility necessary for the development of a personal visual language;
4. develop further their own conceptual and expressive strengths in relation to historical and current visual art practices;
5. be more familiar with current issues in Ceramics and recognise the potential to produce works within the framework of contemporary culture;
6. be more capable of applying elements and principles of design to an increased range of studio situations and objectively analyse and synthesise design options within a Ceramics context;
7. demonstrate effective communication skills and be able to share their work through well-researched class papers and competent critiques of the work of oneself and of other artists;
8. understand and practice the rules of occupational health and safety in force in the Ceramics studio, and be able to collaborate and co-operate safely and productively within the studio environment.

Assessment

Folio of studio work:100%, of which at least 20% will be assessed before mid-semester.

Contact hours

12 hours per week, including four hours of taught studio and eight hours of personal study and studio practice.

Prerequisites

OHS1000 and either CER1131 or CER1142 or VIS1112 or APA1112

Prohibitions

APA2103

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

In each Ceramics 4B unit students become more responsible for the delivery of their major study program, with emphasis placed on increasingly independent investigation, and the further development of the creative and expressive potential inherent in students' work. This, combined with staff consultation, continues to determine students' focuses for future ceramics studio work. Self-motivated practice and research through which students articulate their conceptual and expressive strengths is increasingly utilised. Studio practice is less exploratory and with better grasp of theoretical issues relevant to students' practices.

Objectives

On successful completion of this unit, student should:

1. have further extended both their skills in art making and their vocabulary of materials and Ceramics studio processes;
2. be more able to select and develop a methodology for realizing a self-directed practice, and be more committed to rigorous work practice;
3. have further developed levels of experimentation and investigation within their work, moving towards a focus on specific themes and technologies;
4. have further developed their own technical, iconographic and conceptual concerns, and have a greater understanding of the critical, conceptual and theoretical issues surrounding contemporary Ceramics;
5. demonstrate an advanced capability for managing a project from initial idea, to presentation of the finished work;
6. have developed a increased capacity for the constructive appraisal of their own work, and that of others, and be able to articulate this through oral presentations and written documentation;
7. have increased understanding and practice the rules of occupational health and safety in force in the Ceramics studio, and be able to collaborate and co-operate safely and productively within the studio environment.

Assessment

Folio of studio work: 100% of which at least 20% will be assessed before mid-semester

Contact hours

12 hours per week, including four hours of taught studio and 8 hours of personal study and studio practice

Prerequisites

OHS1000 and CER2123

Prohibitions

APA2104

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This level 3 ceramics unit finely hones the skills acquired over the previous two years. At this stage of the course, students should demonstrate a high level of technical competence, facilitating work in their chosen field. Imagination combined with advanced conceptual lucidity, a prowess and innovation in material manipulation should be manifest at this stage of students' practice. Students develop an individual program in conjunction with the lecturer that reflects their personal direction and evolving ceramics practice. The program focuses on clear articulation of concepts.

Objectives

On successful completion of this unit, student should be able to:

1. be strongly self-motivated, and able to construct independently a program of work with a coherent direction which imaginatively addresses their own concerns;
2. be able to produce works that display conviction, confidence and control in the handling of concepts and materials, and be able to isolate areas of their work that require further research and sustain a directed inquiry into these;
3. understand how to apply existing materials and technologies in new contexts;
4. be able to imaginatively and constructively criticise their own work and the work of others, and show an ability to make informed aesthetic judgements about the character and quality of such work;
5. be able to position their evaluations within the historical and contemporary context of Ceramics and intelligently express these observations;
6. be able to discuss productively, stylistic and semiotic issues relevant to current theory and practice;
7. understand and practise the rules of occupational health and safety in force in the Ceramics studio, and be able to collaborate and co-operate safely and productively within the studio environment with observance of the Occupational Health Safety and Environment regulations and policies of the studio.

Assessment

Folio of studio work:100%, of which at least 20% will be assessed before mid-semester.

Contact hours

24 hours per week, including 8 hours of taught studio and 16 hours of personal study and studio practice.

Prerequisites

Either CER2113 or CER2114 or APA2104

Co-requisites

OHS1000

Prohibitions

APA3105

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is the culmination of the ceramics undergraduate program, and provides a stimulating and supportive environment. Students continue to work autonomously within an individually approved program of study as lecturers encourage the self-motivation, self-appraisal and professional responsibility required of the practising artist. A coordinator supervises the program and gives guidance as it is required and at the request of the students. Students continue to critically appraise their work and consolidate all conceptual, aesthetic and technical issues that relate to the individual direction of their ceramics work.

Objectives

On successful completion of this unit, student should:

1. be able to demonstrate advanced skills and critical strategies in creativity, and be able to work independently with developed self-reliance;
2. be able to produce a coherent body of ceramic work with both high technical standards and theoretical credibility in the framework of contemporary critical discourse;
3. possess a strong faculty and methodology for critical inquiry, enabling them to question and discuss lucidly the issues relevant to current theory and practice in Ceramics and in broader art and design practice;
4. approach contemporary Ceramics practice and aesthetics with challenge and vigour, and be able to establish a personalised and informed discourse within the context of Ceramics practice;
5. achieve a professional presentation and documentation of works in the final submission of. their folio;
6. understand and practise the rules of occupational health and safety in force in the Ceramics studio, and be able to collaborate and co-operate safely and productively within the studio environment with observance of the Occupational Health Safety and Environment regulations and policies of the studio.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester

Contact hours

24 hours per week, including 8 hours of taught studio and 16 hours of personal study and studio practice

Prerequisites

Either CER3115 or APA3105

Co-requisites

OHS1000

Prohibitions

APA3106

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit explores the multi-disciplinary nature of design by introducing the characteristics of space, objects and images as part of a designer's repertoire of knowledge and understanding. Basic design studies provide the framework for the development of a language of design. The understanding of the role of the designer in producing habitats, artifacts and communications for the enhancement of the human experience of contemporary environments is developed by observation, critical enquiry, interpretation, communication and the creation of visual forms. Design is presented as a creative, analytical and synthesizing process with social, cultural and artistic implications.

Objectives

On successful completion of this unit, students should be able to:

1. recognise, analyze and apply the elements and principles of design;
2. understand the nature of the design process and apply methodical steps in their own projects ;
3. understand spatial structures in nature, built forms and visual systems;
4. understand the multidisciplinary nature of many design activities;
5. understand selected colour theories;
6. develop capabilities to communicate research outcomes, design concepts and solutions;
7. appreciate the relationship between design, industry and art;
8. observe and employ occupational health and safety appropriate to studio practice.

Assessment

Series of exercises 20%
Minor project 20%
Two major projects 60%

Chief examiner(s)

Dr Jennifer Butler

Contact hours

12 hours per week, including One 1-hour lecture and 3 studio hours plus 8 independent study hours

Prerequisites

Admission to any Monash bachelors degree.

Co-requisites

OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit places the more abstract concepts and studies undertaken in Design Studio 1 in the context of design practice to meet human needs. The project work uses simplified professional projects to ensure students start to consider all aspects of design problems. The projects involve the use of brief, analysis of requirements, design problem solving methods, synthesis of design resolutions and communication of design solutions. The primary concern in the subject is for the student to be able to overcome the project constraints in order to integrate the range of requirements and issues, and achieve a holistic design that addresses human needs.

Objectives

On successful completion of this unit, students should be able to

1. analyse a simple design brief;
2. understand the range of technical factors and cultural issues that must be considered for a meaningful and satisfying outcome of requirements;
3. explore and evaluate design options;
4. apply problem solving methods, synthesis design resolutions and communicate solutions using models, presentation and technical drawings;
5. achieve an integrated holistic design at a basic level that addresses human needs; observe and employ occupational health and safety appropriate to studio practice.

Assessment

One minor project: 20% Two major projects: 80%

Chief examiner(s)

Gene Bawden

Contact hours

4 studio hours plus 8 hours independent study weekly

Prerequisites

DGN1001

Co-requisites

OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

The interdisciplinary studio environment, provides through team-based project activities and problem-based learning, the application of knowledge and techniques from the students individual design disciplines, whilst solving a complex multi-faceted design problem. Offshore context requires students to respond in a conscious and critical manner to the local environment, and to exercise entrepreneurial skills to research.

Objectives

1. operate constructively as part of a team;
2. contribute as a discipline-specific designer within an interdisciplinary design context;
3. support and assist other design specialists;
4. develop observation, research and information gathering skills conducted in an unfamiliar cultural context; and
5. conduct critical enquiry and provide summative reviews of self and peers.

Assessment

Exercises and projects: 90%
Attendance and participation: 10%

Chief examiner(s)

Jen Butler

Contact hours

8 studio hours and 14 hours of independent study per week.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit develops practical design research, investigation, conceptual development, communication, presentation and practice capabilities. The focus is on design research and design management of multi and inter disciplinary projects, in which a range of design factors are considered and methodologies employed to coordinate their analysis and to achieve a holistic design integration that addresses human needs. Projects will be set in a variety of contexts.

Objectives

On successful completion of this unit, students should be able to:

1. undertake a design project at a conceptual level involving the resolution of user requirements, technical issues, aesthetics, and the communication of the design with presentation drawings and models, technical drawings and specifications;
2. evaluate the effectiveness of the methodologies they are applying, and explain the reasoning behind their choice of methodology, media, design options and solutions;
3. understand the role of design as a discipline as well as a professional practice in a particular field;
4. consider critically the imagery in their designs, and its aesthetic and symbolic resonances.;
5. understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

Minor project: 20%, two Major projects: 2 x 40% each

Chief examiner(s)

Dr Jennifer Butler

Contact hours

12 hours per week, including 4 studio hours and 8 hours of independent study

Prerequisites

DGN1104 or VIS1112

Co-requisites

OHS1000

Prohibitions

DGN2103

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit further develops design research, investigation, concept development, communication, presentation and practice capabilities achieved in DGN2003 Interdisciplinary design studio 3. It focuses on expanding the details of user, technical and construction requirements. In addition, the social context of design is extensively considered, including cultural and ethical expectations. Projects will be set in a variety of contexts. A critical view toward designing is fostered throughout.

Objectives

On successful completion of this unit, students should be able to:

1. demonstrate a high level of practical design research, design process and design communication;
2. demonstrate a practical understanding of user, technical and construction factors;
3. demonstrate an awareness of social, cultural, environmental and gender issues;
4. produce design solutions which resolve identified issues with aesthetic integrity;
5. defend their designs on practical, symbolic, aesthetic and ethical grounds.;
6. understand and apply the principles of occupational health and safety practices in the studio.

Assessment

Minor project: 20%
Two major projects: 2 x 40% each

Chief examiner(s)

Gene Bawden

Contact hours

12 hours per week including 4 studio hours and 8 independent study hours

Prerequisites

DGN2003

Co-requisites

OHS1000

Prohibitions

DGN2104

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Multi-faceted and multidisciplinary projects. Studies of the contemporary discourse in spaces, objects and images. Their embodiment as habitats, artefacts and communications. Related social theory. Students articulate and test their individual design philosophies in studio discussion.

Objectives

On successful completion of this unit, students should be able to

1. articulate a personal aesthetic that responds to contemporary discourse in design;
2. undertake design projects with a high degree of integration of all project factors;
3. competently resolve the technical and/or structural requirements of the design;
4. specify the production scenario for the design;
5. communicate the design with high quality presentations and specifications;
6. observe and employ occupational health and safety appropriate to studio practice

Assessment

Projects: 80%
Oral and written presentations: 20%

Chief examiner(s)

Dr Jennifer Butler

Contact hours

8 studio/seminar hours and 16 hours of independent study per week

Prerequisites

DGN2004

Co-requisites

OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

A major project selected by the student in consultation with the course coordinator. The topic will serve as a vehicle to demonstrate the student's understanding and capabilities. Project planning and research is an important aspect of the unit.

Objectives

On successful completion of this unit, students should be able to

1. undertake a major project with effective resolution of technical detail at a level sufficient to brief specialists;
2. develop a brief; analyse client and user requirements; research and resolve technical requirements; specify materials, finishes; and construction concepts;
3. communicate and present the project design to client and constructors;
4. explain analytically the cultural sources of the inspiration for the design;
5. express persuasively the aesthetic and symbolic values embedded in the design;
6. relate the design to historical and contemporary precedents, not only for the sake of explaining its technical and cultural virtues but for potential refinements and the development of vision in their future career;
7. observe and employ occupational health ans safety appropriate to studio practice

Assessment

Project research, planning, design: 80%
Project report: 20%

Chief examiner(s)

Gene Bawden

Contact hours

8 studio hours and 16 hours of independent study per week

Prerequisites

DGN3105

Co-requisites

OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is the first part of a major design project. It provides an opportunity to research issues, undertake conceptual designs and develop refinements on the basis of the advanced attainment achieved at the end of the Bachelor of Design course. In most instances the project is proposed by the student at the beginning of the semester in consultation with the lecturer, and approved by the lecturer and course coordinator.

Objectives

On successful completion of this unit, students should:

1. Demonstrate a capability to research and explore the full range of issues to be considered in a design project;
2. Be able to practice design to a high standard of professional competency;
3. Be able to relate their work to contemporary discourse and seek to extend its boundaries through their design work;
4. Be able to defend their chosen direction in the major project against informed criticism;
5. Have a base of sound knowledge, understanding and capability to undertake their major project;
6. Be capable of organising, developing and planning methodologies associated with the major project which will help to successfully determine a viable outcome.

Assessment

Mid-semester portfolio: 20%
Final portfolio: 80%

Contact hours

6 formal studio hours and 18 hours of independent study per week

Prerequisites

Admission to Bachelor of Design (Honours)

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is the second part of the major project sequence for the honours course, where students are expected to continue with the research initiated in DGN4001, and develop a time frame which details the final visual presentation in consultation with a supervisor and the course coordinator.

Objectives

On successful completion of this unit, students should:

1. be able to develop and refine their design project from the conceptual stage undertaken in DGN4001 Major Project (Design) Part 1 through to a visual presentation which demonstrates a very high level of capability;
2. demonstrate a comprehensive understanding of the discipline and its professional practices, with particular reference to the social, cultural and aesthetic aspects of their investigation;
3. have a high level of knowledge of the contemporary discourse in design and visual communication and to be able to position their work relative to it;
4. be able to debate and/or defend their practice in an informed critical appraisal;
5. demonstrate they have cultivated high ambitions to perfect their practice of design.

Assessment

Mid-semester portfolio: 20%
Final portfolio: 80%

Contact hours

6 formal studio hours and 30 hours of independent study per week

Prerequisites

DGN4001

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit encourages the creative, open and innovative use of computer-mediated art and design. Students are introduced to the various software options (including drawing, painting, and image-editing software) and peripheral devices for digital acquisition, storage and output. Demonstrations and lectures are given on the techniques and capabilities of vector and pixel-based applications for both print and screen-based outcomes.

Objectives

On successful completion of this unit, students should:

1. have a basic practical and critical understanding of digital imaging and its links with other media;
2. be able to access the Faculty computing resources, including access facilities with a clear understanding of appropriate health and safety studio procedures and implement these procedures within their work practice;
3. competently operate a computer, familiarizing themselves with operation system basics and file management;
4. be able to use peripheral devices (ie. scanners, printers) to acquire, compose and output images;
5. use image editing software to skilfully create, adapt, edit, manipulate and compose images;
6. be able to apply digital imaging techniques towards the realisation of conceptualised, communicative works;
7. have the foundation necessary to undertake further units in digital imaging with a view towards either specialisation or application of the media within other studio disciplines.

Assessment

Exercises: 40% Project: 50% Journal: 10%

Chief examiner(s)

Matthew Perkins

Contact hours

12 hours per week, comprising: 3 taught hours (1 lecture plus 2 hour tutorial) and 9 independent study hours.

Prerequisites

Admission to a degree program of the Faculty of Art & Design. Non Art & Design students require prior permission from an Art & Design course coordinator to enrol in this unit.

Co-requisites

OHS1000

Prohibitions

DIS1101 and/or DIS1102

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to principles of web design. File formats, colour modes, image resolution and bit depth, and preparation of images for on-line delivery. The development, status and potential of delivering information and graphics over digital networks using computers. Variations on network types including Internet and Intranets. Protocols, set-up and file formats commonly used. Motion graphics and on-line delivery of multimedia documents are also covered.

Objectives

On successful completion of this unit, students will:

1. Be able to prepare multimedia documents suited to on-line delivery;
2. Be able to identify the different technologies for web design, including mark-up languages, interactive multimedia formats, video/sound streaming, and database systems;
3. Understand web page construction and principles, file and site management, and web design for accessibility and usability;
4. Be able to use text, images, animation, sound and digital video as multimedia elements in electronic documents;
5. Be familiar with colour mode and resolution requirements for a range of electronic media;
6. Be aware of a variety of file formats, and be able to optimise a media file for a particular application;
7. Be able to understand the role of web design in multimedia.

Assessment

Major projects: 50%
Exercises: 50%

Chief examiner(s)

Jeff Janet

Contact hours

12 hours per week, including: 1 lecture hour, 2 studio hours and 9 hours of independent study

Prerequisites

DIS1103

Prohibitions

MMS1402, FIT1012

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to the methods and processes involved in creating 3D elements, objects and spaces using a computer software. The key areas of modelling, lighting and rendering will be examined, and various modes of output demonstrated. Different applications of CGI (computer generated imagery), such as motion graphics, character animation and virtual environments are discussed. 3D models will be used to generate simple animation.

Objectives

On successful completion of this unit, students will

1. Have an understanding of the principles of designing objects and spaces in three dimensions and their translation into computer-based design methodologies;
2. Be able to use 3D imaging software to create environments and objects;
3. Be able to apply surface qualities, lighting, textures, and imported graphic files to elements in a three dimensional composition;
4. Explore the range of options and controls available through 3D imaging and modelling software applications;
5. Understand and manipulate camera properties and viewer perspectives;
6. Recognize the various applications of 3D design and visualisation across multimedia, interior architecture and industrial design practices.

Assessment

Major projects: 50% Exercises: 30% Journal: 20%

Chief examiner(s)

Trinh Vu

Contact hours

1 lecture hour, 3 studio hours, 8 study hours

Prerequisites

DIS1102 or DIS1103 or VMC1001

Prohibitions

DIS2901, DIS2902

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

On completion of this unit students should be able to: understand the principles and application of Computer Aided Design (CAD) and drafting for interior architecture; apply computing principles for space planning, technical documentation, information management, and construction-related research in relation to interior architectural design and technical problems; generate graphic communications and computer technical drawings detailing the construction of interior architecture; understand interactive visualisation methods for the representation of interior architecture; analyse a range of different types of digital architecture practice, and apply this knowledge to creative work.

Objectives

On successful completion of this unit students should:

1. understand the principles and application of Computer Aided Design (CAD) and drafting for interior architecture;
2. be able to apply computing principles for space planning, technical documentation, information management, and construction-related research in relation to interior architectural design and technical problems;
3. be able to generate graphic communications and computer technical drawings detailing the construction of interior architecture;
4. understand interactive visualisastion methods for the representation of interior architecture;
5. be able to analyse a range of different types of digital architecture practice,and apply this knowledge to creative work.
6. observe and employ occupational health and safety appropriate to studio practice.

Assessment

Exercises: 30%
Project: 60%
Journal: 10%

Chief examiner(s)

Sven Mehzoud

Contact hours

12 hours per week, comprising: 3 taught hours (1 one hour lecture plus 2 tutorial hours) and 9 independent study hours

Prerequisites

DIS1103

Prohibitions

DIS2908

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to digital imaging within art and design studio practices. It builds sequentially upon the skills and knowledge of digital processes by providing a focus upon creative image production for a range of digital media applications. Students explore the creation, manipulation, composition and output of digital images with increasing confidence and proficiency across a range of options and controls available through vector and pixel-based software applications and use of peripheral devices. Demonstrations and lectures are given on the creation of digital images with an increased conceptual understanding of representational issues, visual language and communication.

Objectives

On successful completion of this unit, students will:

1. skillfully and insightfully create, edit, manipulate, compose and output digital images;
2. explore the range of options and controls available through vector and pixel-based software applications and use of peripheral devices with increasing confidence and proficiency;
3. produce creative digital images with an increased conceptual understanding of representational issues, visual language and communication; ;
4. demonstrate increased technical understanding of demands required across the development, acquisition, creation and production of digital media; ;
5. display an increasingly personalized artistic expression and sophisticated creative digital imaging approach which can be pursued at an advanced stage in subsequent digital imaging studios; ;
6. understand and be able to apply the rules of occupational health and safety and environment appropriate to this unit of study, particularly those applying to use of computing equipment, access to facilities, and the environment of healthy and safe studio practices.

Assessment

Exercises: 30%. Project: 60%. Journal: 10%.

Chief examiner(s)

Vince Dziekan

Contact hours

12 hours per week including: One 1 hour lecture and 2 tutorial hours and 9 independent study hours per week

Prerequisites

DIS1103 or Successful completion of VCM1001 and MMS1402

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to digital audio and video production. It develops sequentially upon the skills and knowledge of digital imaging by providing a focus on the principles of digital a/v design and industry-standard software applications. Students are introduced to scripting, storyboarding, film and narrative conventions common to cinema. In order to explore audio recording, video capture and nonlinear editing, students are introduced to the tools and features of video cameras and editing software. Demonstrations and lectures are given on planning and collaborative management, types of media sources and output considerations associated with digital audio/video production.

Objectives

On successful completion of this unit, students will

1. understand design conventions and narrative concepts common to cinema;
2. identify tools and features of digital video cameras and digital audio and video software;
3. utilise script and storyboard to illustrate concepts;
4. plan and manage an audio recording session;
5. plan and manage a video capture session;
6. acquire footage, incorporate graphics and manage a variety of media sources into a video sequence;
7. explore nonlinear editing techniques, including editing effects, transition and wipes;
8. collaboratively contribute to planning and management of a digital audio/video production;
9. address appropriate output considerations for the assembly and preparation a digital video/audio production; ;
10. understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

Exercises: 30%. Project: 60%. Journal: 10%.

Chief examiner(s)

Caulfield: Matthew Perkins, Gippsland: TBA

Contact hours

12 hours per week including: one 1 hr lecture plus 2 hours tutorial hours and 9 independent study hours per week

Prerequisites

DIS1103 and OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to 3D modelling within art & design studio practices. It builds sequentially upon the skills and knowledge of 3D design and imaging by providing a focus upon the practice and potential of 3D computer-generated modelling for product design. Students explore the creation, manipulation, composition and output of digital 3-dimensional elements with increasing confidence and proficiency across a range of options and controls available through polygon and NURBS-based software applications and the understanding of production issues associated with their output (ie. rendering, rapid-prototyping, multimedia etc.)

Objectives

On successful completion of this unit, students will be able to:

1. skillfully and insightfully create, edit, manipulate, compose and output digital 3-Dimensional elements (ie. photorealistic renderings, surface models);
2. explore the range of options and controls available through polygon and NURBS-based software applications and production issues associated with output (ie. rendering, rapid-prototyping, multimedia, etc) with increasing confidence and proficiency;
3. produce 3D models with an increased design intention and creative application;
4. demonstrate increased technical understanding of demands required across the development, application, creation and production of 3D computer-generated models.
5. display an increasingly personalized expression and sophisticated creative 3D design approach which can be pursued at an advanced stage in subsequent 3D imaging studios;
6. observe and employ occupational health and safety principles and rules appropriate to studio practice .

Assessment

Exercises: 30%; Project: 60%; Journal: 10%

Chief examiner(s)

Jeff Janet

Contact hours

12 hours per week, including 4 contact hours (1 hr lecture plus 3 hours tutorial) and 8 independent study hours.

Prerequisites

DIS1911 and OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to design for 'New Media'. It builds sequentially upon the skills and knowledge of multimedia imaging by providing a focus upon interactive multimedia and authoring. Students are introduced to a conceptual approach to interactivity, non-linear narrative, navigation, and graphical user interface controls. Technically, students will experiment with various software to develop content for multimedia applications. Students will develop skills in planning and organising content for multimedia publication.

Objectives

On successful completion of the unit, students will

1. recognize the conceptual and technical demands of producing multimedia content;
2. creatively approach communication with 'new media';
3. define, develop, plan and organise content for multimedia publication (ie. develop skills in storyboarding, flowcharting);
4. apply and experiment with various software to develop, edit and compile asset materials for multimedia publication;
5. explore the concepts of interactivity, non-linear narrative, navigation, and graphical user interface controls;
6. apply a range of digital imaging, scripting and organisational techniques and concepts to project work;
7. develop and produce a multimedia project negotiating aspects of interface design, media, animation and interactivity;
8. work in a variety of roles required in the development and production of multimedia; ;
9. understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

Exercises: 30%. Project: 60%. Journal: 10%.

Chief examiner(s)

Rodney Forbes

Contact hours

12 hours per week including: one 1 hour lecture plus two tutorial hours and 9 independent study hours per week

Prerequisites

DIS1704 and OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to time-based imaging for 3D design and imaging. It develops sequentially upon the skills and knowledge of 3D imaging by providing a focus upon advanced asset creation and animation. Students are introduced to the range of options and controls available through 3D imaging and modeling software applications, towards skillfully creating, manipulating and animating 3D objects, manipulating camera properties and viewer perspectives. Demonstrations and lectures are given on conceiving, designing and producing animation sequences for inclusion into multimedia presentations with consideration for delivery methods and the merits of different media types and formats.

Objectives

On successful completion of this unit, students will

1. design and develop defined 3D models with application for animation;
2. skilfully create and manipulate 3D objects within a changing environment utilizing light and atmospheric conditions;
3. explore the range of options and controls available through 3D imaging and modeling software applications;
4. experiment with surface qualities to enhance the 3D appearance of the created object;
5. understand and manipulate camera properties and viewer perspectives;
6. prepare animation sequences for inclusion into multimedia presentations with consideration for delivery methods and the merits of media types and formats; ;
7. understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

Exercises: 30%. Project: 60%. Journal: 10%

Chief examiner(s)

Jeff Janet

Contact hours

12 hours per week including: one 1 hour lecture plus 2 tutorial hours and 9 independent study hours per week

Prerequisites

DIS1911 and OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to electronic design for print outcomes. It develops sequentially upon the skills and knowledge of digital imaging by providing a focus upon the fundamental principles of graphic design and page layout. Students are introduced to the relationship of various software applications for electronic publishing to the design, efficient management of text, image assets and the preparation of files for presentation of digital artwork to a bureau required for the production of printed material. Demonstrations and lectures are given on visual communication and the graphic design of publication projects that emulate advertising industry standards.

Objectives

On successful completion of this unit, student will:

1. recognize the basic set-up and components of a graphics workstation and peripheral devices and display an understanding of industry-standard publishing software;
2. understand the relationship of various software applications for electronic publishing to the design and production of printed material;
3. be able to manage a variety of digital assets associated with an electronic publication (ie. translating and importing native image/graphic files created in other digital imaging applications, format text files, colour management, use typographic style sheets and document specifications);
4. demonstrate efficient organization of text, image assets and the preparation and files for presentation of digital artwork to a bureau;
5. apply visual communication, graphic design and page layout skills to publication projects that emulate advertising industry standards;
6. understand and be able to apply the rules of occupational health and safety environment appropriate to this unit of study, particularly those applying to use of computing equipment, access to facilities, and the employment of healthy and safety studio practices.

Assessment

Exercise: 30%. Project: 60%. Journal: 10%.

Chief examiner(s)

Jeff Janet

Contact hours

12 hours per week, including: one 1 hour lecture plus 2 tutorial hours and 9 independent study hours per week

Prerequisites

DIS1103 or Successful completion of VCM1001 and MMS1402 or Successful completio of VCM1001 and FIT1012

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit provides students with basic 3D documentation and digital manipulation skills particular to applications in the built environment and develops students' understanding of computer-based design for virtual architecture. It builds sequentially upon the skills and knowledge of 2D digital architectural documentation processes by providing a focus upon spatial modeling and rendering principles and their applications. Emphasis is placed on developing students capabilities at generating virtual architectural representations, in static and animated form. This unit is undertaken as an area of specialisation within the interior architecture degree.

Objectives

On successful completion of this unit students should:

1. understand the principles and application of computer-based modelling and rendering for interior architecture;
2. be able to apply computing principles for 3D visualisation, technical documentation, information management, and presentation in relation to interior architectural design problems;
3. be able to generate still and animated communications and computer-generated renderings describing the construction methods and ambient qualities of interior architecture;
4. understand interactive visualisastion methods for the representation of interior architecture;
5. be able to analyse a range of different types of digital architecture presentation techniques,and apply this knowledge to creative work and
6. observe and employ occupational health and safety appropriate to studio practice.

Assessment

Exercise: 30%
Project: 60%
Journal: 10%

Chief examiner(s)

Kate Tregloan

Contact hours

12 hours per week, comprising: 3 taught hours (1 one hour lecture plus 2 tutorial hours) and 9 independent study hours

Prerequisites

DIS1912 + Core for BIA and elective for other students

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit provides students with high-level studio practice in all aspects of digital arts, design and new media. It explores the possibilities of digital mediums as a fine art tool and as a vocational or design orientated tool. It focuses on creative image and media production for a range of art and design applications. Emphasis is placed on combining techniques in storyboarding, imaging, animation, interactivity, interface design, scripting and information architecture to develop creative and functional outcomes. Students develop smaller multimedia or static work projects that address all levels of the creative process and project management. A substantial journal is required.

Objectives

On successful completion of this unit, students should be able to:

1. obtain the ability to select the best way to present an idea in a digital environment be it still, interactive or moving and apply this framework to the students own work.
2. have effective communication skills and visual language that takes into account industry-related demands of multimedia practice and awareness of creative developments in new media.
3. understand more complex principles of interactive design including the role of a "user", ability to maintain design integrity and continuity in a project and a broad understanding of the technical roles and processes needed in a digital project.
4. apply creativity, problem-solving, research and project development directly associated with multimedia design, digital imaging and interactive media to explore a range of creative solutions to briefs.
5. demonstrate an increased technical proficiency in production of digital media using industry standard software applications and peripheral devices.
6. have a working general knowledge of historical and contemporary concepts related to their own work and that of their peers and be able to articulate these concepts. Students should have a high level of independence with regard to researching ideas and source material.
7. demonstrate a broad interest and appreciation of digital practices and culture.
8. Observe and employ occupational health and safety appropriate to studio practice.

Assessment

Students will be assessed on several thematic and technical exercises and projects. Students submit a journal as documentary evidence of the development of the work. It is graded according to the evidence of research, development, inventiveness and understanding of the issues involved in digital arts and new media and also awareness of contemporary issues.
Journal: 20%
Projects: 70%
Exercises: 10%

Chief examiner(s)

Greg Giannis

Contact hours

8 hours

Prerequisites

DIS2105 and DIS2601

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Students create a substantial piece of work/works that explore ideas within a digital environment (interactive, moving or static) based on a preproduction document. This unit consolidates outcomes using specific software or technologies that explore the potential of digital mediums to express ideas with a broad understanding of the mediums' potential. It explores ideas, conceptual constructs, aesthetics and functionalities of new media and digital productions. The final project should communicate self generated ideas that address issues in imaging, animation, interactivity, interface design, scripting and information architecture. Students keep a journal in relation to the set project.

Objectives

On successful completion of this unit, students will:

1. be able to evaluate critically their own work and that of others within historical and contemporary contexts and be able to express this in both written and oral form.
2. be able to produce a project which indicates the development and synthesis of a personal visual language expressing a conceptual integrity.
3. be able to produce work of a high degree of resolution with technical proficiency digital media, using industry standard software applications, peripheral devices.
4. demonstrate a curiosity and method of inquiry which enables them to question and discuss the issues relevant to current art theory, practice and contemporary culture.
5. have the ability to select the best way to present an idea in a digital environment be it still, interactive or moving.
6. consolidate communication skills and visual language that takes into account industry-related demands of multimedia practice and awareness of creative developments in new media.
7. have a high level of independence with regard to researching ideas and source material for their final project.
8. observe and employ occupational health and safety appropriate to studio practice.

Assessment

Assessment will be based on the completion of a single major project and its supporting preproduction document. Students submit a journal as documentary evidence of the development of the work. It is graded according to the evidence of development, inventiveness and understanding of the issues involved in digital arts and new media and awareness of contemporary issues and research.
Journal: 20%
Projects: 60%
Preproduction document: 20%

Chief examiner(s)

Rodney Forbes

Contact hours

8 hours

Prerequisites

DIS3010

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit extends existing knowledge of digital imaging and multimedia design into the production of interactive animation. Students will understand essential theory and concepts, the range of individual roles, technical skills and resources required for animation production. Individual exercises lead to the development of projects that explore the representation of gameplay, generative systems and other interactive processes through animation

Objectives

On successful completion of this unit, students will be able to:

1. understand the interactive animation production process;
2. understand theory and concepts that relate to interactive animation and games;
3. explore the representation of gameplay, generative systems and other interactive processes through animation;
4. define, develop, plan and organise content for interactive animation;
5. understand the range of individual roles, technical skills, and resources required for animation production;
6. develop and produce interactive animation projects;
7. observe and employ occupational health and safety appropriate to studio practice

Assessment

Exercises 40%
Major Projects 60%

Contact hours

12 hours per week, comprising 1 hour lecture, 2 hours tutorial and 9 independent study hours

Prerequisites

Must have passed both in MMD1302 and MMS1402 or both MMD1302 and FIT1012 or DIS1704 or approval from Course Coordinator

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is designed for students who wish to specialise their skills and knowledge in 3D computer graphics. It builds sequentially upon the skills and knowledge of 3D design and imaging by providing an opportunity to develop a more sophisticated understanding of the methods and theories of generating synthetic images. Emphasis is placed upon students developing their creative skills through a combination of directed and self-directed practice. The unit offers students the opportunity to investigate issues of modelling, space and animation, specific to their proposed projects.

Objectives

On successful completion of this unit, students will be able to:

1. determine efficient methods for modeling objects using a number of surfacing techniques;
2. demonstrate ability in creating stylized and realistic textures and materials;
3. display competency in using lighting and atmospheric elements in 3D world;
4. explore the range of options in creating visual effects in 3D imaging;
5. apply the concepts of modeling, movement and rendering in a substantial project;
6. experiment with a variety of output options for their final work;
7. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Directed assignments: 30%; Major project: 60%; Journal: 10%

Chief examiner(s)

Jeff Janet

Contact hours

12 hours per week, including 4 studio contact hours and 8 independent study hours.

Prerequisites

OHS1000 and one of DIS2907, DIS2908, or DIS2904 3D Modelling.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to the concepts and tools applicable to the moving image such as digital video and motion graphics. It offers students an opportunity to explore the potential of the moving image in a wide range of communications and multimedia applications. It extends the skills students have gained previously in working with digital images, both still and time based. The unit will enable students to bring their creative practice to a substantial level of competency with skills in both the technical and aesthetic aspects of the moving image, with emphasis on refining their personal visual language.

Objectives

On successful completion of this unit, students will be able to:

1. use the computer and peripheral devices to acquire, compose & output visual content;
2. utilise a range of software applications in the creation, editing and realization of conceptual moving image works;
3. skilfully & creatively work with digital images (ie. graphic, photographic, video);
4. explore animation techniques and compositing effects associated with motion graphic imaging;
5. consider and apply appropriate output formats;
6. understand design and narrative concepts common to various moving image conventions;
7. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Directed projects: 30%; Self directed projects: 60%; Journal: 10%

Chief examiner(s)

Joel Zika

Contact hours

12 hours per week including 4 contact hours (1 hour lecture plus 3 hours tutorial) and 8 independent study hours.

Prerequisites

OHS1000 and DIS2105 or DIS2601

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is designed for students who wish to specialise their skills and knowledge in digital imaging. It builds sequentially upon the skills and knowledge of digital imaging by providing an opportunity to develop a more sophisticated understanding of the methods and theories for generating digital images for static and/or dynamic applications. Emphasis is placed upon students developing their creative skills through a combination of directed and self-directed practice. The unit offers students the opportunity to investigate issues associated with a variety of imaging approaches and digital media specific to their proposed projects.

Objectives

On successful completion of this unit, students should be able to:

1. skillfully and insightfully create, edit, manipulate, compose and output digital images;
2. apply the range of options and controls available through vector and pixel-based software applications and use of peripheral devices at an advanced level;
3. produce creative digital images (illustrative, photographic, motion graphic, time-based) with a high level of conceptual understanding of representational issues, visual language and communication.;
4. demonstrate advanced technical understanding of demands required across the development, acquisition, creation and production of digital media;
5. display a developed personalized artistic expression and sophisticated creative digital imaging approach;
6. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Directed assignments: 30%; Major project: 60%; Journal: 10%

Chief examiner(s)

Jeff Janet

Contact hours

12 hours per week including 4 studio contact hours and 8 independent study hours.

Prerequisites

OHS1000 and either DIS2105 or DIS2601

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit extends student's knowledge of concepts and tools applicable to digital and audio production techniques. It builds sequentially upon the skills and knowledge of preceding units by providing a focus upon advanced principles of digital audio and video design and industry-standard software applications. With a greater focus on specialization the students will concentrate on utilizing the medium to a professional level. Emphasis is placed upon exploring the potential of digital video and audio as a medium for inclusion in a wide range of communications and multimedia applications and over various contexts. In this unit student's knowledge will also extend beyond video editing software to sound and DVD authoring applications. Emphasis is placed upon students developing their creative skills through a combination of directed and self-directed practice. On completion students will then be able to confidently return to their studios and utilize these skills artistically and/or commercially with a higher degree of professionalism and understanding of the medium.

Objectives

On successful completion of this unit students should:

1. utilise a range of software applications (including sound and media authoring) to an advanced level in the creation, editing and realization of conceptual digital audio video works;
2. have an advanced practical and critical understanding of video production (including various lighting conditions, advanced camera operations and audio recording techniques);
3. be able to produce a major body of work which demonstrates advanced technique integrally linked with ambitious ideas;
4. have an advanced understanding of video encoding for a range a distribution methods (web, DVD authoring, digital media players);
5. Applying highly polished audio video production skills to a range of potential output considerations such as: film, video, short film, television, documentary, web, documentation and video art
6. have considered how their work is placed in the context of current art and design practice;
7. be able to articulate their practice with clarity and insight to a high standard;
8. understand key production roles such as: producer, director, art director, director of photography, lighting, sound recordist and editor;
9. observe and employ occupational health and safety appropriate to studio practice.

Assessment

Folio 90% (which includes progressive assessment), Journal 10%.

Chief examiner(s)

Matthew Perkins

Contact hours

12 hours per week, comprising 3 contact hours (1hr lecture plus 2 hrs tutorial) and 9 independent study hours

Prerequisites

DIS2601 and OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to digital publishing within art and design studio practices. It builds sequentially upon the skills and knowledge of electronic design by providing a focus upon digital methods of publication. Students explore digital workflow through a variety of software applications and a range of delivery options for digital publishing with increasing confidence, proficiency and technical understanding of demands required across the development, creation and realisation of networked publishing outcomes.

Objectives

On successful completion of this unit, students will be able to:

1. skillfully and insightfully conceive, develop, create, compose and output digital publications;
2. explore digital workflow through a variety of software applications and range of delivery options for digital publishing with increasing confidence and proficiency;
3. produce creative digital publications with an increased conceptual understanding of hypertext forms and visual communication;
4. demonstrate increased technical understanding of demands required across the development, creation and realization of networked publishing outcomes;
5. display an increasingly personalized artistic expression and sophisticated creative digital media approach which can be applied to self-promotion and publishing strategies for marketing and visual communication;
6. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Exercises: 30%; Project: 60%; Journal: 10%

Chief examiner(s)

Jeff Janet

Contact hours

12 hours per week including 4 contact hours (1 hour lecture plus 3 hours tutorial) and 8 independent study hours.

Prerequisites

OHS1000 and DIS2909

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Through a sequence of exercises that use the human figure and natural and made objects, skills in observation, representation, visualisation and basic design organisatonal, students acquire practical and intellectual skills. Individual interpretation and response is encouraged to facilitate the development of students' drawing skills and visual and aesthetic awareness.

Objectives

On successful completion of this unit, students should:

1. be able competently to represent objects by drawing, expressing form and volume and demonstrating a basic understanding of visual structure;
2. use their understanding of the relationships between the formal elements of line, tone and shape in composition and basic design;
3. understand an appropriate range of drawing methods and materials pertinent to the study;
4. visualise and express this ability through appropriate forms of notation;
5. understand some of the theoretical and psychological issues that provide the context for a chosen visual language;
6. recognise the range of drawing processes, media, styles and sign systems and their application.

Assessment

Studio work: 70 %
Project work: 30%

Chief examiner(s)

Dr Stephen Garrett

Contact hours

12 hours per week, including 4 studio hours and 8 independent study hours

Prohibitions

PPR3201

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

An intensive program facilitating the acquisition and development of practical and intellectual skills required by fine art and visual arts students in the discipline of drawing. Observation, analysis, selection, interpretation and expression are studied through sequential projects. Manufactured and natural forms including the human figure and other models are central to the investigation of proportion, structure, volume and space through line, tone, shape, movement and texture. A range of fine art drawing materials and methods are explored.

Objectives

On successful completion of this unit, students will:

1. have basic skills needed to represent objects by drawing, expressing their proportion, form and volume whilst displaying a basic grasp of structure;
2. understand the relationships between the formal elements of drawing, including line, tone and shape and the relationships between these as they are incorporated within compositional dynamics;
3. appreciate the need for selectivity and identifying visual prejudice;
4. be able to use drawing to analyse the processes of perception and critically consider drawing in relation to observational objectivity;
5. express curiosity about the historical, theoretical, philosophical and aesthetic contexts of drawing.

Assessment

Folio: 100%

Chief examiner(s)

Dr Stephen Garrett

Contact hours

4 studio hours and 8 independent study hours per week

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

An intensive program which extends students' intellectual and practical skills in seeing, observation, analysis, selection and visual expression; sequential projects are set to facilitate these outcomes. Individual response and interpretation are encouraged to assist students to develop a personal visual language that underpins and aids their major study.

Objectives

On successful completion of this unit, students will:

1. be able to represent objects and their spatial relationships with a growing understanding of form and volume, their underlying structures, and how these are manipulated to achieve a successful expressive outcome;
2. competently use a broad range of drawing methods and materials;
3. have a deepening understanding of the theoretical, aesthetic, philosophical and historical contexts that inform conventional and contemporary Fine Art drawing practice and a curiosity to pursue these issues further;
4. be able to consider the aesthetic possibilities arising from the tension between expressive impulses and observational objectivity;
5. relish the capacity to observe and assess previous visual knowledge by discovering new knowledge; to analyse these discoveries and, by selection and sythesis, develop an individual expressive response and working process that may form the basis for a personal visual language.

Assessment

Folio: 100%

Chief examiner(s)

Dr Stephen Garrett

Contact hours

5 studio hours and 7 independent study hours per week

Prerequisites

DWG1201

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Practical and intellectual skills required by students of design in drawing. Through a sequence of topics that make use of the human figure and both natural and made objects, the skills in observation, representation, visualisation and organisation are promoted. Individual interpretation and response is encouraged to assist students' development of visual and aesthetic awareness necessary to the major study.

Objectives

On successful completion of this unit, students will:

1. be able to represent objects by drawing, expressing their form and volume and showing a basic understanding of structure;
2. use their understanding of the relationships between the formal elements of line, tone and shape incorporated within compositional dynamics;
3. understand an appropriate range of drawing methods and materials pertinent to the study;
4. visualise and express this ability through appropriate forms of notation;
5. be curious about the historical, theoretical, philosophical and aesthetic contexts that inform drawing practice.

Assessment

Folio: 100%

Chief examiner(s)

Dr Stephen Garrett

Contact hours

5 studio hours and 7 independent study hours per week

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit provides students with the opportunity to relate to a broader definition of drawing in relation to contemporary art practice, and encourages students, through bold graphic experimentation, to maximise their capacity for individual invention and expression in responding to a variety of natural forms. Students will work from the model, the still life and from nature.

Objectives

On successful completion of this unit, students will:

1. have a wide graphic visual vocabulary to serve and maximise their individual expressive needs;
2. have aesthetic sensibilities that enable them to critically determine imagery that bridges both historical and contemporary art;
3. productively develop a wide variety of visual material and techniques relevant to their major discipline.

Assessment

Folio: 100%

Chief examiner(s)

Dr Stephen Garrett

Contact hours

3 studio hours and 9 independent study hours per week

Prerequisites

Any of DWG1102, DWG1202, DWG1301, DWG1401

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit provides students with an opportunity to relate the broadest possible definition of drawing to current art practices, methods and materials. Through a series of set projects, students will be encouraged, through the use of materials and formats, to explore ideas and develop concepts in ways that may assist their major studies. The study is designed to assist students to develop notational skills, to investigate advanced concepts and to become aware of strategies for successfully articulating visual research.

Objectives

On successful completion of this unit, students will:

1. possess a working knowledge of a variety of current drawing techniques and methods of visual notation;
2. have resourcefulness in employing unusual or unorthodox combinations of materials, formats and environments experimentally in exploring concepts, and to coherently pursue defined aims;
3. be able to clearly articulate, through a variety of drawing approaches, major conceptual issues implicit in a given area of visual research;
4. possess an appreciation of drawing both as a way of informing vision, and as a constructive complement to other areas of studio activity.

Assessment

Study Option A: Folio: 100% (which includes at least 20% of assessment by mid-semester) or Study Option B: Folio: 100% (60% at end of block teaching
40% at end of program)

Chief examiner(s)

Dr Stephen Garrett

Contact hours

Study Option A: 3 studio hours and 9 independent study hours per week or Study Option B: 156 hours including 36 hours block teaching and 120 hours of independent study

Prerequisites

Any of DWG1102, DWG1202, DWG1301, DWG1401

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

A further advancement for students in the study of drawing activities as they relate to the broad field of current art practice. A series of projects offer opportunities for students to advance their capacities in arriving at individual interpretations and solutions. Group discussions and activities are aimed at encouraging the further development of drawing as significant medium of visual research.

Objectives

On successful completion of this unit, students will:

1. have individual responses to a variety of set visual problems through use, for the purposes of notation and expression, of a wide range of materials and mediums;
2. be able rigorously to pursue, through a variety of drawing media and methods, a concentrated sequence of ideas;
3. have an advanced understanding and knowledge of the broad range of drawing contemporary complement to art practices, and its relevance as a complement to other areas of studio activity.

Assessment

Folio: 100%

Chief examiner(s)

Dr Stephen Garrett

Contact hours

3 studio hours and 9 independent study hours per week

Prerequisites

DWG2507

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

An intense investigation of the skills required for drawing the human figure with competence. Studio classes using life models develop skills in observing inner structure, gesture, spatial organisation and characterisation. Technical studies of representational devices, mark selection, emphasis, and lighting promote a broader understanding of the uses of figure representation in a variety of art practices.

Objectives

On successful completion of this unit, students will:

1. be able to achieve an advanced competence in the representation and characterisation of a variety of figure subjects through drawing;
2. have understanding of the internal structure and proportions of the human figure, the dynamic relationships between its various parts, and its potential for movement as expressed through action, tension and repose;
3. explore the representation of the figure in a variety of spatial contexts, and through a variety of conceptual and technical approaches;
4. be able to consult a large body of reference in the history of the representation of the figure in western art and consider critically the continuing meaning of the genre in the context of contemporary culture.

Assessment

Folio: 100%

Chief examiner(s)

Dr Stephen Garrett

Contact hours

3 studio hours for one semester and 9 independent study hours per week

Prerequisites

Any of DWG1102, DWG1202, DWG1301, DWG1401, or permission

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit provides students of art and design with the opportunity to explore the relationship between Fine Art practice and anatomy. Through a variety of media and methodologies, the students explore how to make sense of the form and structure of the body, drawing on perceptual, observational and conceptual drawing strategies; as well as contemporary issues regarding the body found in critical theory. Students will work from the life model, marquettes, anatomical specimens (including prosected cadavers) and various forms of diagrammatic representation of the body. The unit will also address the OHS and ethical issues required for study in this area.

Objectives

"On successful completion of this unit students should:

1. have a wide graphic visual vocabulary to serve and maximise their individual expressive needs in relation to the body;
2. have aesthetic sensibilites that enable them to critically determine imagery that bridges both historical and contemporary art;
3. productively develop a wide variety of visual material and techniques relevant to their major discipline
4. have an appreciation of the structures of the body that may be of interest to the contemporary artist;
5. have an undertanding of the appropriate procedures for complying with OHS and ethical requirements in this area of study."

Assessment

By folio 100% (all objectives). Initial project or work-in-progress is assessed in the first part of the semester and contributes a weighting of no less than 20% to the final assessment.

Chief examiner(s)

Dr Stephen Garrett

Contact hours

12 hours per week, including 3 studio hours and 9 independant study hours

Prerequisites

Any of DWG1201, DWG1202, DWG1301, DWG1103

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Using the premise of the sketchbook, notebook, journal or diary, students are to develop a personal response to the proposition: how to record the overseas location as a unique site. The notions of site-specificity, context, perception and cultural difference in relation to contemporary art practice will be addressed. An informed and developed sensitivity to the documentation of research activity is intended to facilitate the student's major study. While any media may be employed in the analysis of site and context, the documentation of the skills and knowledge acquired should remain two-dimensional.

Objectives

On successful completion of this unit, student should:

1. Be able to competently explore and design a range of information gathering systems appropriate to the area of interest of their major studio research;
2. Be able to make manifest a record of original perceptions and responses to the overseas location as a unique site;
3. Have a deeper understanding of the significance of site and context for the creation and location of their work;
4. Have a greater appreciation of the specificity of visual, verbal or conceptual languages to a particular culture;
5. Be able to investigate how to articulate original work through an appreciation and incorporation of such newly experienced languages in a way that remains cogent to their major study;
6. Understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

Folio: 100%, of which at least 20% is assessed mid semester

Chief examiner(s)

Ken Smith

Contact hours

156 hrs: comprising of a six weeks' block of 24 hrs of intensive studio teaching with 48 hrs of independent study overseas, plus 84 hrs of additional study for the remainder of the semester.

Prerequisites

DWG1101 and DWG1102; or DWG1201 and DWG1202 or DWG1342 and DWG1231 and OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

An advanced study in which projects are set with increasingly broad parameters to equip students with the cognitive, technical and aesthetic skills necessary to formulate a personal language of visual expression that is capable of supporting, informing and stimulating their major study. Students are encouraged and expected to be increasingly independent in project definition, visual research and problem solving thereby assisting them to become active, informed and confident participants in visual arts discourse.

Objectives

On successful completion of this unit, students will:

1. have confidence in using drawing materials experimentally to achieve defined expressive, conceptual or decorative ambitions;
2. be able to make informed aesthetic judgements about the character and quality of their imagery;
3. be capable of clearly articulating the major conceptual issues implicit in their chosen area of visual research;
4. have an increasing ability to work independently, both on set projects and on themes of personal relevance;
5. appreciate the wider role of visual research and investigation, especially in informing and extending personal interpretation and imagery.

Assessment

By Folio: 100%

Contact hours

3 studio hours and 9 hours of independent study

Prerequisites

DWG2508

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This study deals with the theoretical and practical issues involved in the drawing of aesthetic proposals that are realised in the form of contemporary practices as conceptual and installation art in architectural and environmental. The study deals with both the creation of images that may be installed in actual contexts and the processes used in the pictorial development of visual ideas for possible realisation in other forms and locations. This includes initial thoughts and conceptions, clarification in response to practical problem solving, representation as vivid and clear images capable of being presented to a commissioning body or regulatory agency.

Objectives

On successful completion of this unit, students will:

1. possess an awareness of the correspondence between pictorial space utilised in traditional drawing practice and actual three-dimensional space utilised in aspects of contemporary arts practice;
2. be capable of confidently recording and modifying visual concepts by drawing, through the consideration of the practical concerns implicit in the realisation of conceptual and installation art;
3. be able to successfully present and communicate, through drawing, visual concepts to an audience that may include those not used to looking at and understanding images;
4. possess the capacity to make informed and considered judgements about the appropriateness of drawing materials to specific tasks;
5. have an appreciation of the historical, theoretical and aesthetic issues pertinent to drawing that are dealt with by contemporary art practitioners working in the disciplines of conceptual and installation art.

Assessment

By folio 100%. Initial project or work-in-progress is assessed in the first part of the semester and contributes a weighting of no less than 20% to the final assessment.

Chief examiner(s)

Dr Stephen Garrett

Contact hours

12 hours per week including 3 studio hours and 9 hours of independent study

Prerequisites

Must have passed either DWG2502 or DWG2503 or DWG2504 or DWG2507 or DWG2509 or DWG2510

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit provides students of art and design with a further opportunity to explore the relationship between Fine Art and anatomy. Through a variety of media and methodologies, students explore how to make sense of the form and structure of the body, drawing on perceptual, observational and conceptual drawing strategies. Students will work from the life model, marquettes, anatomical specimans and various forms of diagrammatic representation of the body; with increasing specialisation and knowledge, directed towards individual study projects. Appropriate OHS guidelines and consideration of the ethical requirements of the unit will be addressed.

Objectives

On successful completion of this unit students should:

1. have a wide and sophisticated graphic visual vocabulary to serve and maximise their individual expressive needs in relation to the body;

2. have aesthetic sensibilities that enable them to critically determine imagery that bridges both historical and contemporary art;

3. productively develop a wide variety of visual material and techniques relevant to their major discipline;

4. have an in depth appreciation and understanding of the structures of the body that may be of interest to the contemporary artist;

5. have a thorough understanding of the OHS and ethical issues relating to this area of study.

Assessment

By folio (100%). Initial project or work-in-progress is assessed in the first part of the semester and contributes a weighting of no less than 20% to the final assessment.

Contact hours

12 hours per week, including 3 studio hours and 9 independant study hours

Prerequisites

DWG2511

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit provides students of art and design with a further opportunity to relate to a broader definition of drawing in relation to contemporary art practice and encourages the student through bold graphic experimentation to maximise their capacity for individual invention and expression in responding to a variety of natural forms. Students will work from the model, still life, nature and other resources to develop their individual practice in an increasingly informed manner.

Objectives

On successful completion of this unit students should:

1. have a wide graphic visual vocabulary to serve and maximise their individual expressive needs;

2. have aesthetic sensibilities that enable them to critically determine imagery that bridges both historical and contemporary art;

3. productively develop a wide variety of visual material and techniques relevant to their major discipline;

4. have an understanding of the appropriate procedures for complying with OHS and ethical requirements in this area of study.

Assessment

By folio 100% (all objectives). Initial project or work-in-progress is assessed in the first part of the semester and contributes a weighting of no less than 20% to the final assessment.

Chief examiner(s)

Dr Stephen Garrett

Contact hours

12 hours per week, including 3 studio hours and 9 independant study hours

Prerequisites

DWG2504

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit offers an extended engagement with the representational issues prefaced in the previous figure drawing unit. In a studio class, sequential projects, using either male or female life models, will explore the visual description of the human figure in a variety of spatial contexts. This will promote the investigation and discovery of a range of appropriate representational strategies involving drawing media, use of colour and scale of imagery and format.

Objectives

On successful completion of this unit, students will:

1. have skill in using an extended range of drawing materials and processes to confidently create dynamic relationships between the figure and its surrounding space;
2. possess an understanding of the relationship of drawing to colour in the creation and manipulation of form and space;
3. be capable of making drawings in a variety of sizes including the possibility of very large scale;
4. begin to recognise individual responses to the perceptual world and make independent judgements on the appropriateness of procedures and techniques for their description;
5. possess greater understanding of the philosophical, theoretical and aesthetic issues underlying the perceptual drawing process.

Assessment

By folio 100%. Initial project or work-in-progress is assessed in the first part of the semester and contributes a weighting of no less than 20% to the final assessment.

Chief examiner(s)

Dr Stephen Garrett

Contact hours

12 hours per week including 3 studio hours and 9 hours of independent study

Prerequisites

DWG2509

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit offers advanced specialisation in the skills and concepts related to the exercise of drawing the human figure. It deals with technical understanding but also with the cultural position of the genre in the context of current Fine Arts practice. In studio classes using life models and through projects which cultivate curiosity and inquiry, students investigate and create rich images involving the human figure. A practical study of the work of historical and contemporary exemplars of figure imagery is an important part of the unit.

Objectives

Upon completion of this unit, students will:

1. possess advanced skills in the representation of single and multiple figures in a diversity of spatial contexts;
2. be able to articulate the major conceptual issues implicit in the perceptual description of the human figure;
3. be able to make informed aesthetic judgements about the character and quality of their imagery;
4. have an increasing ability to work independently, both on set projects and on themes of personal relevance;
5. possess an appreciation of how the continual investigation of the perceived world may inform and extend personal interpretation and imagery.

Assessment

By folio 100%. Initial project or work-in-progress is assessed in the first part of the semester and contributes a weighting of no less than 20% to the final assessment.

Chief examiner(s)

Dr Stephen Garrett

Contact hours

12 hours per week including 3 studio hours and 9 independent hours

Prerequisites

DWG3519

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is used by the Faculty of Art and Design to enrol students undertaking outbound exchange studies at a host institution. Students will not be able to enrol in this unit via WES. The faculty will manage the enrolment of students undertaking an outbound exchange program to ensure fees and credit are processed accurately.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Issues in public art including the role of public art, excellence and artistic license, freedom in publicly owned spaces, art embracing urban planning, context and site, the nexus of art and architecture. Information and planning including expressions of interest, working to a budget, negotiating a contract, concept proposals, collaboration and sub-contracting, installation and working on site, maintenance and promotion.

Objectives

On successful completion of this unit, students should be able to:

1. appreciate the fundamental issues and topics relevant to the rationale and practice of public art;
2. critically evaluate historical and current public art works within a national and international context;
3. interpret the requirements of a commissioner's brief through analysis, scrutiny and imagination;
4. facilitate strategies in organisation, planning and design for major proposals;
5. express succinctly in oral, written and visual form concepts which are appropriate to a public art project;
6. communicate clearly the overall proposal through oral and presentation.

Assessment

Set exercises, project and oral presentation: 100%

Contact hours

3 studio hours and 9 independent study hours per week

Prerequisites

Completion of first year units, 48 credit points in either the BFA or BAppA, or BVA

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Studio at honours level is research-oriented and non-prescriptive in terms of content. Students produce a proposal at the beginning of the semester but are free to carry out their work with any number of deviations from their original plans. The intentions of students and the results of their work are debated in group discussions and critical sessions.

Objectives

On successful completion of this unit, students will:

1. be keen to perfect their practice in Fine Art with excellence in technique and to perceive a relationship between technical excellence and the visionary aspirations of their discipline;
2. be able to pursue an area of studio practice with a strong sense of direction and commitment and an equally strong curiosity for the possibility of redirecting their practice;
3. feel some confidence defending their chosen direction in studio practice against informed challenge and criticism;
4. be resolved to find the 'logical' extension of their practice, whether through higher degrees of technical refinement or refusal of established aesthetic criteria or critical regimes;
5. seek to extend their practice with reference to the history of the particular genre in Fine Art which is their specialization, empowering them not only with the knowledge of authoritative precedents but the practical advantage of technical and iconographic cues;
6. be keen to relate critically their chosen direction in Fine Art to the terms of contemporary discourse;
7. find an appropriate balance between intuitive processes underlying their practice and critical reason or analytical thought.

Assessment

Folio: 100%

Chief examiner(s)

Kit Wise

Contact hours

24 hours (lecture, tutorial, individual supervision) per week

Prerequisites

Admission to honours program

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Studio at honours level is research-oriented and non-prescriptive in the terms of its content. Students produce a proposal at the beginning of the semester but are free to carry out their work with any number of deviations from their original plans. The intentions of students and the results of their work are debated in group discussions and critical sessions.

Objectives

On successful completion of this unit, students will:

1. cultivate high ambitions to perfect their practice with technical excellence and to establish a relationship between mastery in technique and the visionary dimensions of their area of specialization in Fine Art;
2. be able to find working habits which prolifically engage the imagination and expedite both the realization of artistic intentions and critical reflection on the results;
3. be keen to determine suitable artistic intentions which allow them to achieve an appropriate balance between the sensual faculties and the reasoning or critical faculties;
4. enjoy the prospect of debating or defending a given direction of practice in their discipline against critical interrogation;
5. be keen to engage in a dialogue with the history of their chosen genre, empowering them not only with familiarity and the ability to manipulate prestigious exemplars but with the confidence to challenge the authority of historical precedents or the uncritical values imposed upon them in received histories;
6. be curious about identifying the poetic dimension of their practice, either with reference to the symbolic use of design objects, the imagery contained in works, the tensions between conflicting semiotic expectations, the artful use of metaphor or humour or anything else;
7. identify inspiration not only with the innovative faculties related to finding new methods or novel imagery but with the power of consolidating old aesthetic ideas with a consistent impetus genuinely felt by the emerging practitioner;
8. be happy, wherever personal inspiration indicates, to embrace traditional methods and intentions in Fine Art, and be prepared to define traditional practice as research, provided that new or continuing applicability in the recent history of ideas can be demonstrated.

Assessment

Folio: 100%

Chief examiner(s)

Kit Wise

Contact hours

36 hours (lecture, tutorial, individual supervision) per week

Prerequisites

FNA4001

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to the practice and theory of glass as a means of contemporary creative expression. It focuses on raising awareness of and providing the means to achieve an initial level of competence within the glass discipline, while imparting a sound conceptual and technical basis for continuing study in that discipline. The safe handling of materials and equipment is emphasised as an essential part of all studio practice.

Objectives

On successful completion of this unit, students will:

1. demonstrate competence in basic design principles and be able to apply them in the practice of the Glass discipline;
2. understand a variety of production methods used in the studio environment, have an appreciation of the nature of various mediums, their properties and uses, and be able to work with materials and techniques in an imaginative and engaging manner;
3. have formed an understanding of relevant terminology commonly used in the Glass discipline;
4. show they can initiate, develop and express personal aesthetic solutions in the medium of choice;
5. demonstrate an understanding of the synthesis between concept, design solution, process and Glass production;
6. be able to present their work to an audience with theoretical and historical rationale;
7. have an appreciation and understanding of the required organisation and management of individual workspaces and consideration of others in the studio environment;
8. have formed a growing awareness of the contemporary and historical context of the Glass discipline and the role of the artist/designer in the community;
9. possess the knowledge and ability to achieve safe working practices in the activities of the Glass studio.

Assessment

Folio of studio work:100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

George Aslanis

Contact hours

12 hours per week, including four hours of taught studio and eight hours of personal study and studio practice.

Prerequisites

Admission to an Art & Design course or permission.

Co-requisites

OHS1000

Prohibitions

APA1301 or APA1311 or APA1407 or APA1412 or APA1413

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit gives students the opportunity to further develop the ideas concepts, materials and processes begun in the corresponding Glass 1A unit. Students will begin to establish an individual and self directed practice within the broad parameters of the glass discipline. Methods and materials specific to the glass studio discipline will be demonstrated and practiced. Students will be encouraged to develop appropriate links between these methods and other means of creative self-expression. Set projects will require students to develop technical skills hand in hand with their understanding of concepts of current relevance.

Objectives

On successful completion of this unit, students will:

1. have acquired a more discerning and critical awareness in relation to design, selection of materials, working techniques, and conceptual development associated with set exercises and self-generated projects;
2. have increased technical and aesthetic fluency, and begin to initiate, develop and express personal aesthetic solutions in the medium of choice;
3. demonstrate an initial grasp of the importance of research to art practice;
4. be able to present their work in critique sessions with growing confidence as to its theoretical and historical rationale;
5. gain confidence in their ability to communicate (in oral, written and visual form) responses to contemporary issues of both technical and conceptual relevance;
6. understand and apply the principles of occupational health and safety practices in the Glass studio, and be able to collaborate and co-operate safety and productively within the studio environment.

Assessment

Folio of studio work:100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

George Aslanis

Contact hours

12 hours per week, including four hours of taught studio and eight hours of personal study and studio practice.

Prerequisites

Admission to an Art & Design course or permission.

Co-requisites

OHS1000

Prohibitions

APA1302 or APA1312 or APA1322

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit extends the introduction to the practice and theory of glass as a means of contemporary creative expression. It adds to the focus on raising awareness of and providing the means to achieve an initial level of competence within the glass discipline, while imparting a sound conceptual and technical basis for continuing study in that discipline. The safe handling of materials and equipment is emphasised as an essential part of all studio practice.

Objectives

On successful completion of this unit, students will:

1. demonstrate further competence in basic design principles and be able to apply them in the practice of the Glass discipline;
2. add to their understanding of a variety of production methods used in the studio environment, have an increased appreciation of the nature of various mediums, their properties and uses, and be able to work with additional materials and techniques in an imaginative and engaging manner;
3. have added to their understanding of relevant terminology commonly used in the Glass discipline;
4. show they can initiate, develop and express personal aesthetic solutions in the medium of choice;
5. demonstrate an understanding of the synthesis between concept, design solution, process and Glass production;
6. be able to present their work to an audience with theoretical and historical rationale;
7. have an enhanced appreciation and understanding of the required organisation and management of individual workspaces and consideration of others in the studio environment;
8. have formed further awareness of the contemporary and historical context of the Glass discipline and the role of the artist/designer in the community;
9. possess the knowledge and ability to achieve safe working practices in the activities of the Glass studio.

Assessment

Folio of studio work:100%, of which at least 20% will be assessed before mid-semester.

Contact hours

12 hours per week, including six hours of taught studio and six hours of personal study and studio practice.

Prerequisites

Admission to BFA course

Co-requisites

OHS1000

Prohibitions

APA1301 or APA1311

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit gives students the opportunity to further develop the ideas concepts, materials and processes begun in Glass 2A unit. Students will extend the establishment of an individual and self directed practice within the broad parameters of the glass discipline. Methods and materials specific to the glass discipline will be demonstrated and practiced. Students will be encouraged to develop further appropriate links between these methods and other means of creative self-expression. Set projects will require students to develop technical skills hand in hand with their understanding of concepts of current relevance.

Objectives

On successful completion of this unit, students will:

1. have acquired further discerning and critical awareness in relation to design, selection of materials, working techniques, and conceptual development associated with set exercises and self-generated projects;
2. have further increased technical and aesthetic fluency, and continue to initiate, develop and express personal aesthetic solutions in the medium of choice;
3. demonstrate their apprehension of the importance of research to art practice;
4. be able to present their work in critique sessions with increased confidence as to its theoretical and historical rationale;
5. increase their confidence in their ability to communicate (in oral, written and visual form) responses to contemporary issues of both technical and conceptual relevance;
6. understand and apply the principles of occupational health and safety practices in the studio, and be able to collaborate and co-operate safety and productively within the studio environment.

Assessment

Folio of studio work:100%, of which at least 20% will be assessed before mid-semester.

Contact hours

12 hours per week, including six hours of taught studio and six hours of personal study and studio practice.

Prerequisites

Admission to BFA course

Co-requisites

OHS1000

Prohibitions

APA1302 or APA1312

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This Glass 3A unit provides a rigorous program to broaden students' awareness of concepts and techniques across a range of approaches, and encourages them to seek appropriate solutions. Continued research and investigation of materials and processes fosters the acquisition of technical language, and influences appropriate choices to realise concepts within the context of a developing personal visual language. Set projects still occur but the emphasis is on self-motivated approaches. Teaching methods therefore tend to concentrate on individual tuition and group critique. Emphasis is placed on students' continued capacity to critically assess their own work as well as that of their peers.

Objectives

On successful completion of this unit, students will:

1. develop a questioning awareness of practical aesthetic and technical systems or theories and the skills related to them;
2. possess considerable manipulative skills in their chosen area of self expression;
3. have enhanced perceptual skills and critical sensibility necessary for the development of a personal visual language;
4. develop their own conceptual and expressive strengths in relation to historical and current visual art practices;
5. be familiar with current issues in Glass and recognise the potential to produce works within the framework of contemporary culture;
6. be able to apply the elements and principles of design to a broad range of studio situations and objectively analyse and synthesise design options within a Glass context;
7. demonstrate effective communication skills and be able to share their work through well-researched class papers and competent critiques of the work of oneself and of other artists;
8. understand and practice the rules of occupational health and safety in force in the Glass studio, and be able to collaborate and co-operate safely and productively within the studio environment.

Assessment

Folio of studio work:100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

George Aslanis

Contact hours

12 hours per week, including four hours of taught studio and eight hours of personal study and studio practice.

Prerequisites

Either GLS1211 or GLS1212 or VIS1111 or VIS1112 or APA1411 or APA1412 or APA1301 or APA1302 or APA1311 or APA1312

Co-requisites

OHS1000

Prohibitions

APA2303 or APA2411

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

In each Glass 4A unit students become increasingly responsible for the delivery of their major study program, with emphasis placed on independent investigation, and the development of the creative and expressive potential inherent in students' work. This, combined with staff consultation, starts to determine students' focuses for future glass studio work. The emphasis shifts away from set projects towards self-motivated practice and research through which students articulate their conceptual and expressive strengths. Studio practice is still exploratory but with better grasp of theoretical issues relevant to students' practices.

Objectives

On successful completion of this unit, student should:

1. have extended both their skills in art making and their vocabulary of materials and Glass studio processes;
2. be able to select and develop a methodology for realizing a self-directed practice, and the commitment to rigorous work practice;
3. have developed levels of experimentation and investigation within their work, moving towards a focus on specific themes and technologies;
4. continue developing their own technical, iconographic and conceptual concerns, and have an understanding of the critical, conceptual and theoretical issues surrounding contemporary Glass;
5. demonstrate a capability for managing a project from idea, to selection of appropriate materials and processes, to drawing up a time-line and to presentation of the finished work;
6. have developed a capacity for self-appraisal of their own work, and provide constructive critique of the work of others, and be able to articulate this through oral presentations and written documentation;
7. understand and practice the rules of occupational health and safety in force in the Glass studio, and be able to collaborate and co-operate safely and productively within the studio environment.

Assessment

Folio of studio work:100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

George Aslanis

Contact hours

12 hours per week, including four hours of taught studio and eight hours of personal study and studio practice.

Prerequisites

Either GLS1211 or GLS1212 or VIS1111 or VIS1112 or APA1311 or APA1312

Co-requisites

OHS1000

Prohibitions

APA2304 or APA2412

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This Glass 3B unit extends the rigorous program to broaden students' awareness of concepts and techniques across a range of approaches, and further encourage them to seek appropriate solutions. Continued research and investigation of materials and processes fosters the acquisition of technical language, and influences appropriate choices to realise concepts within the context of a developing personal visual language. The emphasis is more on self-motivated approaches than on set projects. Teaching methods therefore tend to concentrate on individual tuition and group critique. This unit continues to focus on the nexus between art making and the cultural and social contexts of art.

Objectives

On successful completion of this unit, students will:

1. develop further their awareness of practical aesthetic and technical systems or theories and the skills related to them;
2. possess superior manipulative skills in their chosen area of self expression;
3. have increased their perceptual skills and critical sensibility necessary for the development of a personal visual language;
4. develop further their own conceptual and expressive strengths in relation to historical and current visual art practices;
5. be more familiar with current issues in Glass and recognise the potential to produce works within the framework of contemporary culture;
6. be more capable of applying elements and principles of design to an increased range of studio situations and objectively analyse and synthesise design options within a Glass context;
7. demonstrate effective communication skills and be able to share their work through well-researched class papers and competent critiques of the work of oneself and of other artists;
8. understand and practice the rules of occupational health and safety in force in the Glass studio, and be able to collaborate and co-operate safely and productively within the studio environment.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

George Aslanis

Contact hours

12 hours per week, including 4 hours of taught studio and 8 hours of personal study and studio practice.

Prerequisites

OHS1000 and either GLS1231 or GLS1242 or VIS1112 OR APA1312

Prohibitions

APA2303 or APA2411

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

In each Glass 4B unit students become more responsible for the delivery of their major study program, with emphasis placed on increasingly independent investigation, and the further development of the creative and expressive potential inherent in students' work. This, combined with staff consultation, continues to determine students' focuses for future glass studio work. Self motivated practice and research through which students articulate their conceptual and expressive strengths is increasingly utilised. Studio practice is less exploratory and with better grasp of theoretical issues relevant to students' practices.

Objectives

On successful completion of this unit, student should:

1. have further extended both their skills in art making and their vocabulary of materials and Glass studio processes;
2. be more able to select and develop a methodology for realizing a self-directed practice, and be more committed to rigorous work practice;
3. have further developed levels of experimentation and investigation within their work, moving towards a focus on specific themes and technologies;
4. have further developed their own technical, iconographic and conceptual concerns, and have a greater understanding of the critical, conceptual and theoretical issues surrounding contemporary Glass;
5. demonstrate an advanced capability for managing a project from initial idea, to presentation of the finished work;
6. have developed a increased capacity for the constructive appraisal of their own work, and that of others, and be able to articulate this through oral presentations and written documentation;
7. have increased understanding and practice the rules of occupational health and safety in force in the Glass studio, and be able to collaborate and co-operate safely and productively within the studio environment.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

George Aslanis

Contact hours

12 hours per week, including 4 hours of taught studio, and 8 hours of personal study and studio practice.

Prerequisites

OHS1000 and GLS2223

Prohibitions

APA2304 or APA2412

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This level 3 glass unit finely hones the skills acquired over the previous two years. At this stage of the course, students should demonstrate a high level of technical competence, facilitating work in their chosen field. Imagination combined with advanced conceptual lucidity, a prowess and innovation in material manipulation should be manifest at this stage of students' practice. Students develop an individual program in conjunction with the lecturer that reflects their personal direction and evolving glass practice. The program focuses on clear articulation of concepts.

Objectives

On successful completion of this unit, students will:

1. be strongly self-motivated, and able to construct independently a program of work with a coherent direction which imaginatively addresses their own concerns;
2. be able to produce works that display conviction, confidence and control in the handling of concepts and materials, and be able to isolate areas of their work that require further research and sustain a directed inquiry into these;
3. understand how to apply existing materials and technologies in new contexts;
4. be able to imaginatively and constructively criticise their own work and the work of others, and show an ability to make informed aesthetic judgements about the character and quality of such work;
5. be able to position their evaluations within the historical and contemporary context of Glass and intelligently express these observations;
6. be able to discuss productively, stylistic and semiotic issues relevant to current theory and practice;
7. understand and practise the rules of occupational health and safety in force in the Glass studio, and be able to collaborate and co-operate safely and productively within the studio environment with observance of the Occupational Health Safety and Environment regulations and policies of the studio.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

George Aslanis

Contact hours

24 hours per week, including 8 hours of taught studio, and 16 hours of personal study and studio practice.

Prerequisites

Either GLS2213 or GLS2214 or APA2304

Co-requisites

OHS1000

Prohibitions

APA3305

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is the culmination of the glass undergraduate program, and provides a stimulating and supportive environment. Students continue to work autonomously within an individually approved program of study as lecturers encourage the self-motivation, self-appraisal and professional responsibility required of the practising artist. A coordinator supervises the program and gives guidance as it is required and at the request of the students

Objectives

On successful completion of this unit, student should:

1. be able to demonstrate advanced skills and critical strategies in creativity, and be able to work independently with developed self-reliance;
2. be able to produce a coherent body of Glass work with both high technical standards and theoretical credibility in the framework of contemporary critical discourse;
3. possess a strong faculty and methodology for critical inquiry, enabling them to question and discuss lucidly the issues relevant to current theory and practice in Glass and in broader art and design practice;
4. approach contemporary Glass practice and aesthetics with challenge and vigour, and be able to establish a personalised and informed discourse within the context of Glass practice;
5. achieve a professional presentation and documentation of works in the final submission of. their folio;
6. understand and practise the rules of occupational health and safety in force in the Glass studio, and be able to collaborate and co-operate safely and productively within the studio environment with observance of the Occupational Health Safety and Environment regulations and policies of the studio.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

George Aslanis

Contact hours

24 hours per week, including 8 hours of taught studio and 16 hours of personal study and studio practice

Prerequisites

Either GLS3215 or APA3305

Co-requisites

OHS1000

Prohibitions

APA3306

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Students will be encouraged to develop their image making by extending their visual vocabulary. It is expected that students will pursue work of an individual nature with an emphasis on a graphic sensibility. Concentration on a particular medium or process such as intaglio, lithography, relief print or artists books will be offered by the lecturer teaching this unit.

Objectives

On completion of this unit students will have been encouraged to select one printmaking process (intaglio, relief, planographic) and explore the technical and image-making possibilities in greater depth; and continue to develop the expressive potential of printmaking as an extension to their major study by exploring ideas and developing projects that originate in the studios of painting, sculpture, ceramics or photography.

Assessment

Artistic and conceptual development: 45%
Technical achievement: 45%
Contribution to critiques: 10%

Chief examiner(s)

Marian Crawford

Contact hours

12 hours per week including 4 studio hours and 8 independent study hours

Prerequisites

GVA2222

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Through the continuing provision of knowledge from historical references, students will undertake a fundamental analysis of the work of `installation' artists and will attempt to produce work within this format (on a limited scale - indoors/outdoors) documentation techniques will be examined with consideration to recording work in an in/outdoor environment. Health and safety awareness will be encouraged at all times within the studio environment.

Objectives

By completion of this unit students are expected to have developed a recognition of the work of various installation artists and the problems associated within the genre of work; fundamental skills in the conception and production of installation work in an indoor or outdoor environment of a limited scale.

Assessment

Attendance and participation: 30%
Folio submission: 70%

Chief examiner(s)

Tony Hanning

Contact hours

12 hours per week, including 4 studio hours and 8 independent study hours

Prerequisites

GVA2422

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

As much as practicable, students will be able to determine their own direction of study within the broad range of photo media. Each student, in consultation with the lecturer, will write a concept proposal for the creation of a body of work. At the end of the semester, a written appraisal by each student of the project will assess processes involved, direction and outcome of the work.

Objectives

By completion of this unit students are expected to have demonstrated the ability to determine the content of their images and to develop self-initiated projects requiring a concept proposal prior to the creation of a body of work and a written appraisal of the project at its completion; and that they have researched and understood the basic theoretical precepts determining photographic practice and examined relevant examples of practice from the history of the medium.

Assessment

Artistic and conceptual development: 45%
Technical achievement: 45%
Contribution to critiques: 10%

Contact hours

12 hours per week including 4 studio hours and 8 independent study hours

Prerequisites

GVA2722

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

By this semester, students will have a reasonable command of their chosen printmaking medium(s). They should be aware of expressive possibilities, both conceptually and visually, and therefore have the ability to design an individually approved program. This program should take into account their major field of study. Concentration on a particular medium or process such as intaglio, lithography, relief printing or artist's book will be offered by the lecturer teaching this unit.

Objectives

On completion of this unit students will be expected to have developed a level of technical competence that will enable them to work independently in the printmaking medium(s) of their choice; have designed and developed an individually approved study program from which a personal approach to printmaking can be derived; and have demonstrated an understanding of the processes and workshop practices (editioning etc) associated with printmaking and to do so with an attitude that is professional.

Assessment

Artistic and conceptual development: 45%
Technical achievement: 45%
Contribution to critiques: 10%

Chief examiner(s)

Marian Crawford

Contact hours

12 hours per week, including 4 studio hours and 8 independent study hours

Prerequisites

GVA2223

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Students at this level will have developed a greater understanding of studio procedures and basic material manipulation and techniques within certain mediums. Emphasis will be placed on the execution of concepts which have an integral relationship to their major area of study. Students will be encouraged to work independently by completing individual projects under guidance. The work of contemporary artists, will be addressed where suitable for each student's progress.

Objectives

By completion of this unit students are expected to have developed responsibility in designing projects which contain a direct relationship to their major area of study; competence with organising concepts, selecting materials, gaining technical and theoretical information through questioning, basic research and practice; a capacity to practice critical dialogue in group sessions regarding the progress of their work; and continued awareness with health and safety concerns.

Assessment

Attendance and participation: 30%
Folio submission: 70%

Contact hours

12 hours per week, including 4 studio hours and 8 independent study hours

Prerequisites

GVA2423

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

The emphasis in this unit is on the production of exhibition-quality photographs of a high standard and strong conceptual base. In addition, students are expected to develop a critical and analytical approach to viewing fine art photographic images and to formulate and express an opinion about works presented.

Objectives

By completion of this unit students are expected to have demonstrated a development of the skills and concepts acquired in the previous three subjects by the production of a body of work of high standard which reflects a progression from and a knowledge of work covered in previous subjects; and the ability to initiate projects based on the student's major philosophical concerns and photographic investigations.

Assessment

Artistic and conceptual development: 45%
Technical achievement: 45%
Contribution to critiques: 10%

Contact hours

12 hours per week, including 4 studio hours and 8 independent study hours

Prerequisites

GVA2723

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Issues of structuring, servicing and constructing spaces are introduced. Projects involve the use of a brief, analysis of requirements, design problem solving methods, synthesis of design resolutions and communication of design solutions. The primary concern in this unit is to overcome the project constraints in order to integrate the range of requirements and issues, and achieve a holistic design that addresses human needs.

Objectives

On successful completion of this unit, students will:

1. analyse a simple interior architecture brief;
2. understand the basic range of factors and issues that must be considered in interior architecture;
3. identify, explore and evaluate design options;
4. apply problem-solving methods, synthesise design resolutions and communicate solutions using models, presentation and technical drawings;
5. achieve an integrated holistic design at a basic level that addresses human needs.

Assessment

Design projects: 90% Oral and written presentations: 10%

Chief examiner(s)

Sven Mehzoud

Contact hours

4 hours taught studio, plus 8 hours of independent study

Prerequisites

DGN1001

Co-requisites

IAR1401 and OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Principles of small scale architectural and interior construction as applied to interiors. Incorporation of services, structure, materials, basic materials science, construction methods and systems. The basic science of construction and building materials, the major types of small scale construction methods, the major materials used in small scale construction and interiors, and ways in which services are integrated into overall construction.

Objectives

On successful completion of this unit, students will:

1. understand principal methods of small scale construction;
2. understand major materials used in small scale construction and interiors;
3. understand the integration of elements and systems used in the building of small scale constructions;
4. understand the basic materials science of commonly used construction and interior materials.

Assessment

Examination: 35% Project: 50% Tutorial presentations: 15%

Chief examiner(s)

Sven Mehzoud

Contact hours

4 hours in class and 8 independent study hours

Prerequisites

DGN1001

Prohibitions

IAR1201, IAR2201

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Communication and media skills required by the professional interior architect, including technical communication and documentation, presentation methods and media, and their applications. Lectures cover the range of media, technical and construction drawing, and specification, and briefing document drafting. Demonstrations and exercises focus on skills in 2D and 3D media, and presentation techniques.

Objectives

On successful completion of this unit, students will:

1. Understand the range and applications of two and three-dimensional media available for exploring and presenting interior architecture designs;
2. Be able to execute conceptual and presentation-standard orthographic and perspective drawings with knowledge of the underlying compositional principles;
3. Understand the range and application of text-based, electronic, and live presentation formats available for exploring and presenting interior architecture designs;
4. Be familiar with the conventions for technical and construction documents and be able to execute technical and construction drawings to a competent standard;
5. Be able to draft basic documents relevant to the practice of interior architecture.

Assessment

Exercises and projects: 80% Minor assignment: 10% Verbal presentation: 10%

Chief examiner(s)

Sven Mehzoud

Contact hours

4 taught hours and 8 independent study hours per week

Prerequisites

DWG1301

Prohibitions

IAR1402, IAR1410

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit and IAR2114 are the key units for developing interior architecture design capabilities. In this unit, the focus is on exposing students to problems which include a variety of interior architectural factors, and applying methodologies to coordinate their analysis and to achieve a holistic integrated design that addresses human needs. The projects are set in a variety of contexts, involving simple construction and structural requirements and basic service issues.

Objectives

On successful completion of this unit, students should be able to:

1. undertake a simple interior architecture project, involving the determination and resolution of user requirements, construction, structuring, servicing, aesthetics;
2. communicate the design with presentation drawings and models as well as technical documentation;
3. evaluate the effectiveness of the design methodologies they are applying;
4. explain the reasoning behind their choice of methodology, media, design options and solutions;
5. account for the social and cultural content of their design decision-making;
6. understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

Design project: 90%, Oral and written presentation: 10%

Chief examiner(s)

Kate Tregloan

Contact hours

12 hours per week, including 4 studio hours
8 independent study hours per week

Prerequisites

IAR1112 and IAR1401 and IAR1211

Co-requisites

OHS1000

Prohibitions

IAR2103

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit and IAR2113 are key units for developing the essence of interior architecture practice. In this unit, the focus is on extending and mastering the range of factors covered in IAR2113 to achieve high quality technical, historical, symbolic, aesthetic and social design solutions

Objectives

On successful completion of this unit, students should be able to:

1. achieve solutions for interior design projects which integrate technical factors, as well as human and social requirements within an holistic aesthetic resolution not limited by the constraints of the project;
2. resolve increasingly complex interior architecture projects;
3. understand a range of design communication media and demonstrate competency in them;
4. have a firm grasp of methodical approaches to interior architecture projects;
5. provide clear reasoning for their choice of methodology, media, design options and solutions;
6. articulate an aesthetic for their design in terms of a social/historical context;
7. understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

Major design project: 90%. Oral and written presentation: 10%

Chief examiner(s)

Kate Tregloan

Contact hours

12 hours per week, including 4 studio hours and 8 independent study hours per week

Prerequisites

IAR2113 and IAR2303

Co-requisites

OHS1000

Prohibitions

IAR2104

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Application of building products, systems and technologies. The Standards Australia codes for major materials and processes. Building Code of Australia and other regulatory controls, with reference to structural aspects of construction, fire issues and health and hygiene issues. Issues of durability, movement and moisture control. Application and performance of principal construction materials. Cost parameters, quantity surveying methods and project management. Dimensional co-ordination and principles of tolerances. Proprietary building systems and fittings relevant to interiors

Objectives

On successful completion of this unit, students should:

1. be familiar with the Building Code of Australia at a basic level;
2. have knowledge of the performance of major materials and the methods of applying them, used in the construction of interiors;
3. understand the basics of quantity surveying methods and simple cost estimation;
4. be capable of applying the above in an interior design project with construction documentation and specifications;
5. understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

Examination: 40%. Project assignment: 60%

Chief examiner(s)

Kate Tregloan

Contact hours

12 hours per week, including; 4 hours in class and 8 independent study hours per week

Prerequisites

IAR1211 and OHS1000

Prohibitions

IAR2202

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is concerned with both the material and immaterial qualities of human experience and the spatial language required for mediation between these states. Traversing the disciplines of art, interior architecture, psychology and spatial theory, the unit will engage in an experimental discourse on the anatomy and morphology of space and place. The unit will explore topics ranging from social and cultural space to perception, cognition and human behaviour. Students from creative and/or theoretical disciplines will engage with these topics through workshop activities and may utilise a variety of media to present their findings.

Objectives

1. Engage in a discourse on the history and theory of spatial production based on the work of leading practitioners across the disciplines of theory, design, architecture and contemporary art.
2. Develop an understanding of available production tools and their applications.
3. Comprehend the role of spatial psychology in the production and experience of space.
4. Demonstrate knowledge of these objectives through the innovative production of made and/or written outcomes.
5. Students will understand and be able to apply rules of Occupational, Health and Safety.

Assessment

Projects: 100% mixed mode: applied and/or theoretical

Chief examiner(s)

Kate Tregloan

Prerequisites

Students must have successfully completed three semesters of study within the Faculty.
Non-Faculty students may apply to enrol in the unit, by permission.
In addition students will be required to complete OHS1000.

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit involves the introduction of issues concerning interior climate, acoustics, power supply, water supply, waste removal, (hydraulics), lighting, escalators/lifts. The issues of energy efficiency and ecological soundness and the basic science of these issues are covered as case studies examining their resolution in buildings

Objectives

On successful completion of this unit, students should be able to:

1. understand the range of service issues involved in interiors;
2. understand the effect of services on interior ambience and construction;
3. understand the basic science of the range of service technologies;
4. understand the elements of structural systems;
5. have knowledge of basic structural elements and constructions and their response to the application of forces;
6. be capable of analysing the behavior of structure;
7. appreciate a variety of major interior and small scale architectural examples utilizing structural concepts and systems;
8. understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

Examination: 40%. Assignments: 60%

Chief examiner(s)

Kate Tregloan

Contact hours

12 hours per week, including; 4 hours in lectures/tutorials and 8 independent study hours per week

Prerequisites

DGN1001 and IAR1211 and OHS1000

Prohibitions

IAR2301 and IAR2304

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit deals with the practical aspects of making models in both studio and workshop, embracing workshop practices, various architectural modelling techniques and the safe use of selected manual/semi automated tools. Students undertake programmed exercises in modelmaking.

Objectives

On successful completion of this unit, students will:

1. have a knowledge of the range of modelling types and their applications;
2. to be able to make a variety of simple architectural models in the studio or workshop;
3. have a general understanding of fabrication techniques and finishing processes involved in the execution of prescribed architectural modelling projects;
4. have a working knowledge of the application and operation of selected manual and semi automatic equipment;
5. understand occupational health and safety policy requirements of the modelmaking workshop and studio environments and be able to demonstrate safe working practices on a selected range of equipment;
6. understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

100%
Students must also pass a safety test

Contact hours

12 hours per week, including; 4 workshop hours and 8 independent study hours per week

Prerequisites

DGW1101 and IAR1401 and OHS1000

Prohibitions

IDE1502

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit provides an introduction to the various creative factors associated with the design of retail environments, displays, graphics and in-store multi-media. This unit addresses the contemporary emergence of intensely designed holistic retail experiences. It is designed to build upon the background and technical skills students have acquired in their respective design specialisations, but to enable them to expand application of this knowledge in creative teams, developing a coherent total retail environment. Site visits relevant to the projects are undertaken.

Objectives

On successful completion of this subject students should be able to:

1. describe key environmental influences on customer in-store behaviour;
2. utilize a variety of 2D, 3D and electronic media to address retail design requirements;
3. co-operate with designers working in other creative disciplines to produce a coherent holistic retail design proposal;
4. interpret a client brief across a range of design practices;
5. develop and present detailed design proposals pertaining to a distinct arena of design practice;
6. demonstrate knowledge of a range of approaches to retailing, and articulate correspondences between the respective retailing philosophies and their expression in design;
7. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Case study 30%; Design projects 70%

Chief examiner(s)

Kate Tregloan

Contact hours

12 hours per week, including 4 class hours and 8 independent study hours per week

Prerequisites

OHS1000 and one of IAR1112, VCO1104, IDE1112, MMD1302

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Projects are complex and multi-faceted. Building code and other statutory and technical requirements are discussed and basic resolution of these issues is a part of the project requirements. Students incorporate understanding of contemporary discourse in interior, environmental and architectural design and related social theory. Students articulate and test their individual design philosophies in studio discussion.

Objectives

On successful completion of this unit, students will be able to:

1. achieve design solutions for interior design projects which integrate technical factors and issues, and human and social requirements within a well-resolved holistic aesthetic that transcends the constraints of the project;
2. undertake basic research and analysis that informs the design approach and its outcomes;
3. resolve increasingly complex interior architecture projects;
4. understand a range of design communication media and demonstrate competency in several of them;
5. have a firm grasp of methodical approaches to interior architecture projects;
6. provide clear reasoning for their choice of methodology, media, design options and solutions;
7. articulate an aesthetic for their design in terms of a social/historical context;
8. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Design projects: 90%; written discourse: 10%

Chief examiner(s)

Nicole Kalms

Contact hours

12 hours per week, including 4 studio hours and 8 independent study hours per week

Prerequisites

Must have passed all units in OHS1000 and IAR2114 and IAR2204 and DIS2908

Prohibitions

IAR3105

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Students integrate the knowledge and capabilities acquired in the previous stages of the course in a major project which demonstrates both a comprehensive understanding of interior architecture and competence in its professional practice. The unit consists of a complex design project with a sufficient range of content to enable the student to demonstrate their capabilities and to enable them to comprehensively undertake and professionally present it within the time and resource limitations of the unit. Project planning and research is an important aspect of the unit: students apply the theory and practice acquired in PPR3102.

Objectives

On successful completion of this unit, students will be able to:

1. undertake an interior architecture project with effective resolution of constructional, structural and service requirements at a level sufficient to brief specialists;
2. develop a brief, analyse client and user requirements, research and resolve technical and planning and building code requirements;
3. specify materials and finishes, construction, structure and services;
4. communicate and present the project to client and constructors;
5. explan analytically the cultural sources of the inspiration for the design, expressing persuasively the aesthetic and symbolic values embedded in the design and relating the design to historical and contemporary precedents;
6. apply a comprehensive project-management strategy for the effective acheivement of project deadlines and outcomes;
7. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Design projects: 90%; written report: 10%

Chief examiner(s)

Nicole Kalms

Contact hours

24 hours per week, including 8 lecture and studio hours and 16 independent study hours.

Prerequisites

Must have passed all units in OHS1000 and IAR3115 and PPR3102

Co-requisites

IAR3205

Prohibitions

IAR3106

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit integrates the work undertaken in IAR1211 and IAR2204 and uses example studies to develop understanding and demonstrate competence in detailing and specifying construction and materials for a range of common interior construction contexts. This unit includes a number of set projects which require students to detail and specify construction and material to a professional standard, sufficient for construction and briefing of the specialists. Site visits relevant to the projects are undertaken.

Objectives

On successful completion of this unit students will be able to:

1. demonstrate competency in detailing and specifying construction and materials for a range of common interior construction contexts;
2. be capable of meeting Building Code of Australia, Australian Standards, and other regulatory requirements;
3. have the ability to undertake a costing;
4. have the ability to provide a management plan for the construction of an interior;
5. understand the components of contracts and contract documentation;
6. have a knowledge of the range of technical data sources available for construction and materials;
7. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Written assignments: 100%

Chief examiner(s)

Nicole Kalms

Contact hours

12 hours per week, including 4 class hours and 8 independent study hours.

Prerequisites

Must have passed all units in OHS1000 and IAR3115 and IAR2204

Co-requisites

IAR3116

Prohibitions

IAR3203

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Students are introduced to built applications of the technology of lighting and daylight, acoustics, power supply, water supply, waste removal, ventilation, heating and air conditioning, kinetic systems and the use of energy efficient and ecologically sound systems. Lectures address structural systems and their components as applied in a range of common interior and small scale architectural projects. Students focus on methods of determining structural integrity and detailing structural systems for construction. Tutorials and seminars discuss the impact of building systems technologies on interior use and ambience.

Objectives

On successful completion of this unit, students will be able to:

1. demonstrate familiarity with the key technical systems used in the provision of building services;
2. apply knowledge regarding services requirements in the specification of products and systems;
3. design interior spaces that incorporate appreciation of the impact of services on construction and interior use and ambience;
4. describe the structural principles that apply in different construction applications;
5. determine appropriate structural systems for a range of common interior projects;
6. detail the application of basic structural systems for construction;
7. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Assignments: 70%; written test: 30%

Chief examiner(s)

Nicole Kalms

Contact hours

12 hours per week, include 4 class hours and 8 independent study hours.

Prerequisites

Must pass all units in OHS1000, IAR2303 and IAR2204

Prohibitions

IAR2302, IAR2305

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Projects are student-generated and complex, usually addressing specialised commercial contexts. Building code and other statutory requirements are researched and resolution of these issues is required as part of the project requirements. Students undertake research studies in specific contemporary discourses and practices pertaining to their project, which may include interior, environmental and architectural design and related social theory. Students develop and articulate their individual project approaches and design philosophies in studio discussion, whilst planning their design process and scheduling the project demands through the semester.

Objectives

On successful completion of this unit, students should be able to:

1. demonstrate understanding of a specialist application of interior architecture, with particular reference to relevant contemporary interior, environmental and architectural design and discourse; and the complexity of human needs that this interior architecture application addresses;
2. articulate a personal aesthetic, cultural and social position relative to it;
3. combine this understanding and capability with the development of an interior architecture project brief and schematic designs that can lead to a high degree of resolution of all project factors;
4. communicate various stages of the project with high quality presentations;
5. self-manage the scheduling of project work;
6. identify, understand and be capable applying the pertinent planning, building code, and other statutory requirements; and
7. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Major design projects: 90%
Project planning assignment: 10%

Chief examiner(s)

Sven Mehzoud

Contact hours

8 studio hours and 16 independent study hours per week

Prerequisites

IAR3116 and IAR3205

Co-requisites

TAD4503 or TAD4523

Prohibitions

IAR4107

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Projects are student-generated and complex, usually addressing specialised commercial contexts. Building construction, detailing, and specifications are researched and documentation of these aspects is required as part of the project requirements. Students undertake detailed design development stemming from their earlier research studies in specific contemporary discourses and practices pertaining to their project. Students develop a fully professional resolution of all technical, philosophical and aesthetic aspects of their individual projects.

Objectives

On successful completion of this unit, students will:

1. demonstrate understanding of a specialist application of interior architecture, with particular reference to relevant contemporary interior, environmental and architectural design and discourse; and the complexity of human needs that this interior architecture application addresses;
2. competently articulate the personal aesthetic, cultural and social position represented by their design solution, in its technical resolution and detail;
3. demonstrate application of this research-based understanding and capability in the development of a fully resolved specialist set of interior architecture designs that resolve to a high degree all project factors;
4. be able to communicate resolution of the project with high quality presentations and professional level technical documentation;
5. self-manage the scheduling of project work;
6. identify, understand and be capable applying the pertinent building technologies, specifications, and documentation techniques, and
7. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Design projects: 80%
Project planning assignment: 20%

Chief examiner(s)

Sven Mehzoud

Contact hours

8 studio hours and 28 independent study hours per week

Prerequisites

IAR4117 and TAD4502 or TAD4523

Prohibitions

IAR4108

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

A period of approved industrial placement (normally six weeks) in an interior architecture or design practice normally taken no earlier than the end of the third year and preferably before the commencement of the fourth year. In many instances students will use the contacts they develop in this unit to help identify an honours project topic.

Objectives

On successful completion of this unit, students will:

1. Be able to perform a variety of tasks to an adequate professional standard within an architectural/interior architectural working environment;
2. Be able to operate effectively and constructively as a team-member within an architectural/interior architectural project team;
3. Be able to reflect critically upon the operational strengths and weaknesses of project and office management procedures employed within an architectural/interior architectural professional context;
4. Understand from first hand experience a variety of the tasks and problems that constitute interior architecture practice, and be able to describe approaches to them.

Assessment

Consultation with staff of the practice (review of a log book and the satisfactory completion of the tasks documented in it): Pass grade only

Chief examiner(s)

Nicole Kalms

Contact hours

240 hours at approved work sites

Prerequisites

IAR3106 and PPR3108 Or IAR3116 and PPR3102

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit outlines the design process with particular reference to creative idea formulation, information searching, problem solving, and incorporation of two and three dimensional design principles in terms of form development. User-centered design models are considered in terms of cultural, physical, logical and semantic constraints, mapping relationships, standardisation, control and feedback factors. Methods of design communication and presentation are explored and applied.

Objectives

On successful completion of this unit, students will:

1. understand and enjoy the challenge of designing consumer objects geared to mass production;
2. have an appreciation of the practical and theoretical nature of industrial design, in particular the intimate relationship between rational processes and inspirational factors in design;
3. have an appreciation of user-centred design criteria;
4. be able to identify, analyse, and interpret the general characteristics of design tasks;
5. understand simple models of the design process and their applications;
6. plan for and efficiently undertake simple three-dimensional projects with regard to functional, technical, structural and aesthetic design criteria.

Assessment

Projects: 100%, of which at least 20% will be assessed in the early part of the program

Chief examiner(s)

Robbie Napper

Contact hours

4 hours studio contact and 8 independent study hours

Prerequisites

DGN1001

Co-requisites

OHS1000

Prohibitions

IDE1102

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit deals with the practical aspects of making models in a workshop, embracing workshop practices, modelling techniques and using manual or semi-automated tools. Students undertake programmed exercises in modelmaking including three dimensional form development, and gain an understanding of the physical and chemical properties of modelling materials

Objectives

On successful completion of this unit, students will:

1. have a knowledge of the range of modelling types and their applications;
2. be able to make simple models of the design objects in the workshop;
3. have a general understanding of fabrication techniques and finishing processes involved in the execution of prescribed design modelling projects;
4. have a working knowledge of the application and operation of manual and semi automatic equipment;
5. understand occupational health and safety policy requirements of the modelmaking workshop environment and be able to demonstrate safe working practices on a selected range of equipment.

Assessment

Progressive assessment: 60%
Examination: 40%

Chief examiner(s)

Robbie Napper

Contact hours

4 hours of taught classes plus 8 hours of individual study per week

Prerequisites

DGN1001

Prohibitions

IDE1501

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit covers an advanced practice of combining techniques and media, as well as experimental methods; introduction to framing of the subject; selection of the most appropriate view; combination of views; development of background treatment; composition of pictorial settings for products.

Objectives

On successful completion of this unit, students will:

1. draw to build ideas and show salient features of an intended design rather than a pre-existing object;
2. appreciate drawing as a method of externalising thoughts and developing ideas;
3. communicate their ideas through concept presentation sketches and renderings;
4. use drawing for persuasion and communication in a product design context;
5. demonstrate proficiency in the use of appropriate drawing mediums and equipment;
6. understand the range of drawing mediums and select appropriate techniques to suit the nature of the design or the communicative purpose.

Assessment

Regular exercises:70% Visual diary: 30%

Chief examiner(s)

Robbie Napper

Contact hours

4 studio hours and 8 independent study hours

Prerequisites

DGN1001, DWG1301

Prohibitions

IDE1601

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

The use of materials and manufacturing processes with particular reference to their application in product design. Product life cycle and environmental design considerations are taken into account to include disassembly techniques and the recycling of metals and plastics. Students gain an understanding of design applicable for low volume manufacture or batch production.

Objectives

On successful completion of this unit, students will:

1. have a basic knowledge of manufacturing methods;
2. understand the properties of materials, used in manufacturing purposes;
3. be able to interpret product designs for low volume, batch production;
4. have a basic knowledge of applied mechanics relating to product design materials and structures;
5. appreciate product life, recycling and environmental issues.

Assessment

Class assignments: 60% Examination: 40%

Chief examiner(s)

Robbie Napper

Contact hours

3 hours lectures and tutorials and 9 hours independent study

Prerequisites

DGN1001

Prohibitions

IDE2401

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit outlines the design process with particular reference to creative idea formulation, information searching, problem-solving, and incorporation of two and three dimensional design principles in form development. User-centered design models are considered in terms of cultural, physical, logical and semantic constraints, mapping relationships, standardisation, control and feedback factors. Methods of design communication and presentation are explored and applied.

Objectives

On successful completion of this unit, students will:

1. understand and enjoy the challenge of designing consumer objects geared for mass production;
2. have an appreciation of the practical and theoretical nature of industrial design, in particular the intimate relationship between rational processes and inspiration in design;
3. have an appreciation of user-centred design criteria;
4. be able to identify, analyse, and interpret the general characteristics of design tasks;
5. understand simple models of the design process and their applications;
6. plan for and efficiently undertake simple three-dimensional projects with regard to functional, technical, structural and aesthetic criteria;
7. understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

Projects: 100%

Chief examiner(s)

Mark Richardson

Contact hours

12 hours per week, including 4 hour studio contact and 8 independent study hours

Prerequisites

IDE1112

Co-requisites

OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit serves as an introduction to the field of consumer product design. Teaching centres on the design of electrical appliances, with emphasis on production issues, value analysis, ergonomics, materials selection, and documentation for manufacture. Consumer appeal and market factors will also be taken into account.

Objectives

On successful completion of this unit, students will:

1. Design products to a high standard of technical and aesthetic performance;
2. Apply product analysis techniques to existing products and learn to develop them for new products;
3. Locate and apply information on materials and manufacturing processes;
4. Carry out design projects for the consumer product field, which incorporate electromechanical components and devices;
5. understand and practice the rules of occupational health and safety in force in the industrial design studio

Assessment

Folio presentation of assigned projects: 100%

Chief examiner(s)

Mark Richardson

Contact hours

12 hours per week including 4 hours studio contact and 8 hours of independent study

Prerequisites

IDE2113

Co-requisites

OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit establishes the principles of formal engineering and geometrical drawing. Topics include equipment and materials, line types, drawing notional elements, projecting and sectioning, presentation principles and an introduction to dimensioning and tolerancing.

Objectives

On successful completion of this unit, students will:

1. appreciate product Engineering Drawing as communication system;
2. understand the importance of product Engineering Drawing as a significant component of the industrial design process;
3. be able to execute drawings of three dimensional objects through projections and sectional views that comply with accepted professional industry convention, in particular Australian Standards (AS1100) to a basic standard;
4. be able to apply the above principles when designing in any computer aided design program;
5. understand and be able to apply the rules of occupational health and safety appropriate to the unit of study.

Assessment

Class exercises: 50%, final examination: 50%

Chief examiner(s)

Selby Coxon

Contact hours

12 hours per week, including one 1 hour lecture and 3 studio hours plus 8 independent hours

Prerequisites

OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

The unit concerns the matching of products to the capabilities of the human body (Anthropometrics) and to the surroundings in which human beings live and work. There is particular reference to safety, usability specification and testing, and the commercial and legal aspects of product ergonomics.

Objectives

On successful completion of this unit, students will:

1. understand the principles and application of ergonomics;
2. be capable of optimising ergonomics in design;
3. be able to develop an ergonomic check lists for products;
4. understand and practice the rules of occupational health and safety in force in the industrial design studio

Assessment

Practical exercises: 80%. Class tests: 20%

Chief examiner(s)

Mark Richardson

Contact hours

12 hours per week, including 1 hour lecture, 2 hours of tutorials and 9 hours independent study

Prerequisites

IDE2701 and OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces the topic of person/product user interface. The mechanical and electro-mechanical systems that determine the relationship between a user's action and its outcome. The unit focuses upon products, environments, and systems, defining their form as it relates to how they are used. The unit covers how these products will be situated socially and culturally.

Objectives

On successful completion of this unit, students will:

1. be able to analyse information and to interpret into a logical flow chart the information required for the operation of electronic and electro-mechanical products;
2. develop sensitivity to understanding user interface issues such as conceptual models, affordance and mapping between interface and functions, as well as creating feedback to actions;
3. develop and prepare a series of working graphic user interfaces from a given or developed database(s);
4. understand and practice the rules of occupational health and safety in force in the industrial design studio

Assessment

Projects: 100%

Chief examiner(s)

Robbie Napper

Contact hours

12 hours per week, including 3 hours studio contact and 9 independent study hours

Prerequisites

DGN1001 and OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit provides an overview of furniture design practice in Industrial Design. It outlines specific issues of the design process with particular reference to form, materials and structure. Methods of design communication and presentation are explored and applied.

Objectives

On successful completion of this unit, students will:

1. diversity of materials and processes for making furniture;
2. increased sophistication in ergonomic analysis;
3. constructional requirements and techniques;
4. the development of furniture design concepts;
5. undertake simple three-dimensional projects with regard to functional, technical, structural and aesthetic design criteria;
6. understand and practice the rules of occupational health and safety in force in the industrial design studio

Assessment

Projects: 100%

Chief examiner(s)

Mark Richardson

Contact hours

12 hours per week, including 4 hours studio contact and 8 independent study hours

Prerequisites

DGN2003 or IDE2113 or IAR2113 and OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit covers the fundamentals of mechanics as applied to consumer products including loads and forces in structures both solid and dynamic. The unit also includes the fundamentals of electronics in product design such as circuit analysis, electrical and magnetic fields, passive and active devices, voltage levels and frequency ranges, safety and regulations as used in a variety of consumer products.

Objectives

On successful completion of this unit, students will:

1. understanding the application of electrical and mechanical systems for contemporary products;
2. understanding a basic working knowledge of electricity and mechanics;
3. applying electrical and or mechanical principles in product design projects;
4. understand and practice the rules of occupational health and safety in force in the industrial design studio

Assessment

Design project: 50%. Examination: 50%

Chief examiner(s)

Mark Richardson

Contact hours

12 hours per week including; 3 hours per week, including 1 hour lecture and 2 hour tutorial and 9 hours independent study

Prerequisites

OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This subject introduces students to designing products for specific purposes at a more advanced level, and builds on knowledge gained in the previous semester. Presentation skills are further developed with the execution off detailed models of product designs, and the use of computer skills for engineering drawing. Emphasis is placed on design methodologies, ergonomics, documentation for manufacture, the sourcing of relevant product data, researching techniques and user analyses.

Objectives

On successful completion of this unit, students will:

1. produce original designs to a high standard of technical, production, and aesthetic requirements, which successfully resolve product semantic issues;
2. undertake value analysis studies of existing products;
3. prepare product design specifications;
4. demonstrate at an advanced level, skills, and abilities in the documentation of designs for production;
5. conceptualise, design and develop for specific market criteria;
6. produce detailed models for presentation purposes.

Assessment

Projects: 70%
Minor Project: 30%

Contact hours

6 studio hours and 6 independent study hours per week

Prerequisites

IDE2104

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit brings together all the studies that students have undertaken in the course. It provides the opportunity for students to demonstrate the capability to integrate all aspects of industrial design project work in a holistic design that demonstrates professional competence. Students are encouraged to think creatively to identify a marketing need, research and source relevant product data, develop a product design specification and undertake the design of a product proposal under supervision of academic staff. Project work is presented in a folio format, documented for production and final design proposals are also undertaken in detailed model form.

Objectives

On successful completion of this unit, students will:

1. integrate technical, aesthetic and symbolic factors involved in an industrial design project;
2. achieve a holistic design, which demonstrates professional competence and cultural awareness;
3. interact with industry and source relevant data;
4. research, select and specify components relevant to individual projects;
5. prepare viable design solutions for volume manufacture in accordance with project criteria;
6. demonstrate communication skills including the execution of detailed-scaled model/s for presentation purposes.

Assessment

Projects: 100%

Contact hours

The Prato option entails additional travel and accommodation costs. 6 studio/tutorial hours and 12 independent study hours per week

Prerequisites

IDE3105

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to designing products for specific purposes at a more advanced level, and builds on knowledge gained in the previous semester. Presentation skills are further developed with the execution of detailed models pf product designs, and the use of computer skills for engineering drawing. Emphasis is placed on design methodologies, ergonomics, documentation for manufacture, the sourcing of relevant product data, researching techniques and user analyses.

Objectives

On successful completion of this unit, students will:

1. produce original designs to a high standard of technical, production, and aesthetic requirements, which successfully resolve product semantic issues;
2. undertake value analysis studies of existing products;
3. prepare product design specifications;
4. demonstrate at an advanced level, skills, and abilities in the documentation of designs for production;
5. conceptualise, design and develop for specific market criteria;
6. produce detailed models for presentation purposes;
7. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Progressive assessment of two design projects: 40% and 60%

Chief examiner(s)

Selby Coxon

Contact hours

4 hours per week of studio and 8 hours of independent study

Prerequisites

OHS1000 and IDE2114

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit brings together all the studies that students have hitherto undertaken in the course. It provides the opportunity for students to demonstrate their capacity to integrate all aspects of Industrial Design project work in a holistic project that demonstrates professional competence. Students are encouraged to think creatively to identify a market need, research and source relevant data, develop a product design specification and undertake the design of a product proposal under the supervision of academic staff. Project work is presented in folio format, documented for production. Final design proposals are also undertaken in detailed model form.

Objectives

On successful completion of this unit, students will:

1. integrate technical, aesthetic and symbolic factors Involved in an industrial design project;
2. achieve a holistic design, which demonstrates professional competence and cultural awareness;
3. interact with industry and source relevant data.
4. research, select and specify components relevant to individual projects;
5. prepare viable design solutions for volume manufacture in accordance with project criteria;
6. demonstrate communication skills including the execution of detailed-scaled model/s for presentation purposes.;
7. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Major design project: 100%, of which at least 20% is assessed during the semester.

Chief examiner(s)

Selby Coxon

Contact hours

24 hours per week including 8 lecture and studio hours and 16 hours of independent study.

Prerequisites

OHS1000 and IDE3115

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

The unit covers the principles of the theories of the person/product interface (the behaviour of product users), the impact of human capabilities on the interface (with particular reference to safety), usability specification and testing, the ergonomics of entirely new products, the commercial and legal aspects of product ergonomics.

Objectives

On successful completion of this unit, students will :

1. understand the principles and application of the theories of the person / product interface;
2. be capable of optimising the person/product interface in design;
3. be able to develop ergonomic check lists for products.

Assessment

Class test: 20%
Practical exercise (product evaluation): 50%
Practical exercise (ergonomic checklist): 30%

Contact hours

One 1-hour lecture and one 1-hour tutorial and 4 independent study hours per week

Prerequisites

IDE2301

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces the field of transportation design including materials technology, ergonomics, future trends and external influences, and transportation design history. Project work will be undertaken using the appropriate drawing and rendering techniques to initiate and present transportation concepts.

Objectives

On successful completion of this unit, students will be able to:

1. accurately sketch preliminary transportation concepts;
2. detail their design solutions using appropriate means and materials;
3. analyse transport design problems;
4. understand transportation design styling terms;
5. understand the types of materials, construction techniques, advances in engineering and technology that have recently occurred in the automotive/transportation industries;
6. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Folio: 80%; Research assignments: 20%

Chief examiner(s)

Mark Richardson

Contact hours

12 hours per week including: 4 hours per week of studio and 8 hours of independent study.

Prerequisites

OHS1000 and IDE2114

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit continues the student's development in the field of transportation design. Further study is undertaken in materials technology, ergonomics, future trends and external influences. Project work will be undertaken using the appropriate drawing and rendering techniques to initiate and present transportation concepts.

Objectives

On successful completion of this unit, students will:

1. have advanced visualising capability in the field of transport design;
2. be able to detail their design solutions and produce three dimensional representations;
3. be able to analyse transport design problems in detail;
4. understand appropriate transportation nomenclature;
5. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Folio submission: 80%; Research assignments: 20%

Chief examiner(s)

Selby Coxon

Contact hours

12 hours per week, including 4 studio hours and 8 independent study hours per week

Prerequisites

OHS1000 and IDE3812

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit broadens the student's understanding of the use and properties of materials in product design. There is a particular emphasis upon new and emerging materials and processes and volumes of production. Lectures cover the following areas of study; comparative assembly techniques, automated assembly, recycling and disassembly, surface treatments, guidelines for designing mouldings; fastening and joining techniques.

Objectives

On successful completion of this unit, students will:

1. have an advanced knowledge of applications of materials and manufacturing in product design;
2. understand the performance of materials including environmental exposure;
3. understand the properties of new and emerging materials and their process interaction;
4. be able to design products for assembly and disassembly;
5. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Progressive assessment: 50%; Class test: 50%

Chief examiner(s)

Robbie Napper

Contact hours

12 hours per week including, 3 studio hours and 9 independent study hours per week.

Prerequisites

OHS1000 and either IDE1802 or ENG1501

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Students are encouraged to develop a greater understanding of furniture design and methods of production. Topics cover aspects of ergonomics, production processes in a variety of materials and the aesthetic aspects of furniture. Further sophistication in the demands of users. Furniture as components of exterior environments, and larger modules such as office spatial requirements. Studio project work is undertaken involving the development of furniture designs to meet particular technical and cultural requirements.

Objectives

On successful completion of this unit, students will have an understanding of:

1. the wide diversity of furniture types;
2. progressive ergonomic analysis;
3. the variety of production methods;
4. aspects of furniture in a wider external environmental context;
5. the development of furniture design concepts and details to meet selected design requirements;
6. the holistic integration of technical, aesthetic, and symbolic factors in their designs;
7. and will observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Minor project: 20%; Major project: 80%

Contact hours

12 hours per week including, 4 taught hours plus 8 hours of independent study.

Prerequisites

OHS1000 and IDE2810

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is the first part of a major industrial design project. The unit provides an opportunity to research issues, undertake conceptual designs and develop refinements on the basis of the advanced attainment achieved at the end of the third year. Students should be particularly concerned with the development of their personal design philosophy, the way in which it responds to social needs and its visual and social expression as a preliminary to its virtuoso development in the major project. The contemporary discourse in industrial design and related theory is actively discussed and debated, with students encouraged to develop a personal position relative to it.

Objectives

On successful completion of this unit, students will:

1. demonstrate a capability to research and explore the full range of issues to be considered in an industrial design project;
2. be able to practice industrial design to a high standard of professional competency;
3. be able to relate their work to contemporary discourse and seek to extend its boundaries through their design work;
4. be able to defend their chosen direction in the major project against informed criticism;
5. have a base of knowledge, understanding and capability necessary to undertake their major project;
6. be capable of organising, developing and planning methodologies associated with the major project which will help to successfully determine a viable outcome; and
7. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Mid-semester portfolio: 20%
Final portfolio: 80%

Chief examiner(s)

Selby Coxon

Contact hours

8 studio hours and 16 hours of independent study hours per week.

Prerequisites

IDE3116

Prohibitions

IDE4107

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is the second of the major project sequence. Students are expected to continue with research initiated in IDE4117, and develop a time frame which details prototype construction in consultation with a supervisor and course coordinator. Project must have appropriate aspects to serve as a vehicle to demonstrate the student's professional understanding and capabilities as well as appropriate complexity to enable the student to professionally undertake and present it within time and resource limitations of the unit. Documentation must be completed to a professional standard. Regular group and individual critiques are undertaken as the project and the thinking underlying it develop.

Objectives

On successful completion of this unit, students will:

1. be able to develop and refine their industrial design project from the conceptual stage undertaken in IDE4107 Major Project (Industrial Design) Part One through to a prototype presentation, demonstrating a high level of capability;
2. demonstrate a comprehensive understanding of the discipline and its professional practices, with particular reference to the social, cultural and aesthetic aspects of their investigation;
3. have a high level of knowledge of the contemporary discourse in design and industrial design and to be able to position their work relative to it;
4. be able to debate and/or defend their practice in an informed critical appraisal;
5. cultivate high ambitions to perfect their practice of industrial design; and
6. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Mid-semester portfolio: 20%
Final portfolio: 80%

Chief examiner(s)

Selby Coxon

Contact hours

8 studio hours and 28 independent study hours per week

Prerequisites

IDE4117

Prohibitions

IDE4108

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit continues from IDE3813. It seeks to develop student's sophistication toward transportation concepts through greater awareness of modeling, materials and processes. Students have an opportunity to create 3D representation in a variety of appropriate modelling media. This enables students to evaluate how well their designs match up to particular technical and cultural requirements. Students will be expected to develop their own design proposals. Topics cover advanced aspects of 3D modelling and production processes in a variety of materials and the aesthetic aspects of transportation. Studio project work involves the development of a sophisticated piece of transportation design.

Objectives

On successful completion of this unit, students will be able to:

1. plan strategies and generate interior / exterior design concepts preferably consistent with design studies previously undertaken in the Transportation Design 2 unit;
2. validate conceptual design work which is feasible for manufacture;
3. show a sound understanding of layouts, component mapping and ergonomic factors in the field of transportation.
4. show sensitivity to the latest aesthetic thinking and material technologies in the area of study;
5. successfully demonstrate a 3D replication of a transportation design concept; and
6. observe and employ occupational health and safety principles and rules appropriate to studio practice.

Assessment

Progressive assessment: 20%
Completion of major project: 80%

Chief examiner(s)

Mark Richardson

Contact hours

12 hours per week including 4 taught hours and 8 hours of independent study.

Prerequisites

IDE3813

Prohibitions

IDE3808

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to the practice and theory of metals and jewellery as a means of contemporary creative expression. It focuses on raising awareness of and providing the means to achieve an initial level of competence within the metals and jewellery discipline, while imparting a sound conceptual and technical basis for continuing study in that discipline. The safe handling of materials and equipment is emphasised as an essential part of all studio practice.

Objectives

On successful completion of this unit, students will be able to:

1. demonstrate competence in basic design principles and be able to apply them in the practice of the Metals and Jewellery discipline;
2. understand a variety of production methods used in the studio environment, have an appreciation of the nature of various mediums, their properties and uses, and be able to work with materials and techniques in an imaginative and engaging manner;
3. have formed an understanding of relevant terminology commonly used in the Metals and Jewellery discipline;
4. show they can initiate, develop and express personal aesthetic solutions in the medium of choice;
5. demonstrate an understanding of the synthesis between concept, design solution, process and Metals and Jewellery production;
6. be able to present their work to an audience with theoretical and historical rationale;
7. have an appreciation and understanding of the required organisation and management of individual workspaces and consideration of others in the studio environment;
8. have formed a growing awareness of the contemporary and historical context of the Metals and Jewellery discipline and the role of the artist/designer in the community;
9. possess the knowledge and ability to achieve safe working practices in the activities of the Metals and Jewellery studio.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

Marian Hosking

Contact hours

12 hours per week, including 4 hours of taught studio, and 8 hours of personal study and studio practice.

Prerequisites

Admission to an Art & Design course, or permission.

Co-requisites

OHS1000

Prohibitions

APA1501 or APA1507 or APA1511 or APA1521 or APA1602 or APA1604

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit gives students the opportunity to further develop the ideas concepts, materials and processes begun in the corresponding Metals and jewellery 1A unit. Students will begin to establish an individual and self directed practice within the broad parameters of the Metals & Jewellery discipline. Methods and materials specific to the Metals & Jewellery studio discipline will be demonstrated and practiced. Students will be encouraged to develop appropriate links between these methods and other means of creative self-expression. Set projects will require students to develop technical skills hand in hand with their understanding of concepts of current relevance.

Objectives

On successful completion of this unit, students will:

1. have acquired a more discerning and critical awareness in relation to design, selection of materials, working techniques, and conceptual development associated with set exercises and self-generated projects;
2. have increased technical and aesthetic fluency, and begin to initiate, develop and express personal aesthetic solutions in the medium of choice;
3. demonstrate an initial grasp of the importance of research to art practice;
4. be able to present their work in critique sessions with growing confidence as to its theoretical and historical rationale;
5. gain confidence in their ability to communicate (in oral, written and visual form) responses to contemporary issues of both technical and conceptual relevance;
6. understand and apply the principles of occupational health and safety practices in the Metals and Jewellery studio, and be able to collaborate and co-operate safety and productively within the studio environment.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

Marian Hosking

Contact hours

12 hours per week, including four hours of taught studio and eight hours of personal study and studio practice.

Prerequisites

Admission to an Art & design course, or permission.

Co-requisites

OHS1000

Prohibitions

APA1502 or APA1512 or APA1522 or APA1524

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit extends the introduction to the practice and theory of metals and jewellery as a means of contemporary creative expression. It adds to the focus on raising awareness of and providing the means to achieve an initial level of competence within the metals and jewellery discipline, while imparting a sound conceptual and technical basis for continuing study in that discipline. The safe handling of materials and equipment is emphasised as an essential part of all studio practice.

Objectives

On successful completion of this unit, students will:

1. demonstrate further competence in basic design principles and be able to apply them in the practice of the Metals and Jewellery discipline;
2. add to their understanding of a variety of production methods used in the studio environment, have an increased appreciation of the nature of various mediums, their properties and uses, and be able to work with additional materials and techniques in an imaginative and engaging manner;
3. have added to their understanding of relevant terminology commonly used in the Metals and Jewellery discipline;
4. show they can initiate, develop and express personal aesthetic solutions in the medium of choice;
5. demonstrate an understanding of the synthesis between concept, design solution, process and Metals and Jewellery production;
6. be able to present their work to an audience with theoretical and historical rationale;
7. have an enhanced appreciation and understanding of the required organisation and management of individual workspaces and consideration of others in the studio environment;
8. have formed further awareness of the contemporary and historical context of the Metals and Jewellery discipline and the role of the artist/designer in the community;
9. possess the knowledge and ability to achieve safe working practices in the activities of the Metals and Jewellery studio.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Contact hours

12 hours per week, including six hours of taught studio and six hours of personal study and studio practice.

Prerequisites

Admission to BFA course

Co-requisites

OHS1000

Prohibitions

APA1501 or APA1511

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit gives students the opportunity to further develop the ideas concepts, materials and processes begun in Metals and jewellery 2A unit. Students will extend the establishment of an individual and self directed practice within the broad parameters of the metals and jewellery discipline. Methods and materials specific to the metals and jewellery discipline will be demonstrated and practiced. Students will be encouraged to develop further appropriate links between these methods and other means of creative self-expression. Set projects will require students to develop technical skills hand in hand with their understanding of concepts of current relevance.

Objectives

On successful completion of this unit, students will:

1. have acquired further discerning and critical awareness in relation to design, selection of materials, working techniques, and conceptual development associated with set exercises and self-generated projects;
2. have further increased technical and aesthetic fluency, and continue to initiate, develop and express personal aesthetic solutions in the medium of choice;
3. demonstrate their apprehension of the importance of research to art practice;
4. be able to present their work in critique sessions with increased confidence as to its theoretical and historical rationale;
5. increase their confidence in their ability to communicate (in oral, written and visual form) responses to contemporary issues of both technical and conceptual relevance;
6. understand and apply the principles of occupational health and safety practices in the studio, and be able to collaborate and co-operate safety and productively within the studio environment.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Contact hours

12 hours per week, including six hours of taught studio and six hours of personal study and studio practice.

Prerequisites

Admission to BFA course

Co-requisites

OHS1000

Prohibitions

APA1502 or APA1512

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

Metals and jewellery 3A unit provides a rigorous program to broaden students' awareness of concepts and techniques across a range of approaches, encouraging them to seek appropriate solutions. Continued research and investigation of materials and processes fosters the acquisition of technical language, and influences appropriate choices to realise concepts within the context of a developing personal visual language. Set projects still occur but the emphasis is on self-motivated approaches. Teaching methods therefore tend to concentrate on individual tuition and group critique. Emphasis is on students' continued capacity to critically assess their own work as well as that of their peers.

Objectives

On successful completion of this unit, students will:

1. develop a questioning awareness of practical aesthetic and technical systems or theories and the skills related to them;
2. possess considerable manipulative skills in their chosen area of self expression;
3. have enhanced perceptual skills and critical sensibility necessary for the development of a personal visual language;
4. develop their own conceptual and expressive strengths in relation to historical and current visual art practices;
5. be familiar with current issues in Metals and Jewellery and recognise the potential to produce works within the framework of contemporary culture;
6. be able to apply the elements and principles of design to a broad range of studio situations and objectively analyse and synthesise design options within a Metals and Jewellery context;
7. demonstrate effective communication skills and be able to share their work through well-researched class papers and competent critiques of the work of oneself and of other artists;
8. understand and practice the rules of occupational health and safety in force in the Metals and Jewellery studio, and be able to collaborate and co-operate safely and productively within the studio environment.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

Marian Hosking

Contact hours

12 hours per week, including four hours of taught studio, and eight hours of personal study and studio practice.

Prerequisites

Either JWL1311 or JWL1312 or VIS1111 or VIS1112 or APA1512 or APA1521 or APA1522 or APA1511 or APA1501 or APA1502

Co-requisites

OHS1000

Prohibitions

APA2503

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

In the Metals & Jewellery 4A unit students become increasingly responsible for the delivery of their major study program, with emphasis placed on independent investigation, and the development of the creative and expressive potential inherent in students' work. This, combined with staff consultation, starts to determine students' focuses for future Metals & Jewellery studio work. The emphasis shifts away from set projects towards self-motivated practice and research through which students articulate their conceptual and expressive strengths. Studio practice is still exploratory but with better grasp of theoretical issues relevant to students' practices.

Objectives

On successful completion of this unit, students should:

1. have extended both their skills in art making and their vocabulary of materials and Metals and Jewellery studio processes;
2. be able to select and develop a methodology for realizing a self-directed practice, and the commitment to rigorous work practice;
3. have developed levels of experimentation and investigation within their work, moving towards a focus on specific themes and technologies;
4. continue developing their own technical, iconographic and conceptual concerns, and have an understanding of the critical, conceptual and theoretical issues surrounding contemporary Metals and Jewellery;
5. demonstrate a capability for managing a project from idea, to selection of appropriate materials and processes, to drawing up a time-line and to presentation of the finished work;
6. have developed a capacity for self-appraisal of their own work, and provide constructive critique of the work of others, and be able to articulate this through oral presentations and written documentation;
7. understand and practice the rules of occupational health and safety in force in the Metals and Jewellery studio, and be able to collaborate and co-operate safely and productively within the studio environment.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

Marian Hosking

Contact hours

12 hours per week, including four hours of taught studio and eight hours of personal study and studio practice

Prerequisites

Either JWL1311 or JWL1312 or VIS1111 or VIS1112, APA1511 or APA1512

Co-requisites

OHS1000

Prohibitions

APA2504

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This Metals and jewellery 3B unit extends the rigorous program to broaden students' awareness of concepts and techniques across a range of approaches, and further encourage them to seek appropriate solutions. Continued research and investigation of materials and processes fosters the acquisition of technical language, and influences appropriate choices to realise concepts within the context of a developing personal visual language. The emphasis is more on self-motivated approaches than on set projects. Teaching methods therefore tend to concentrate on individual tuition and group critique.

Objectives

On successful completion of this unit, students will:

1. develop further their awareness of practical aesthetic and technical systems or theories and the skills related to them;
2. possess superior manipulative skills in their chosen area of self expression;
3. have increased their perceptual skills and critical sensibility necessary for the development of a personal visual language;
4. develop further their own conceptual and expressive strengths in relation to historical and current visual art practices;
5. be more familiar with current issues in Metals and Jewellery and recognise the potential to produce works within the framework of contemporary culture;
6. be more capable of applying elements and principles of design to an increased range of studio situations and objectively analyse and synthesise design options within a Metals and Jewellery context;
7. demonstrate effective communication skills and be able to share their work through well-researched class papers and competent critiques of the work of oneself and of other artists;
8. understand and practise the rules of occupational health and safety in force in the Metals and Jewellery studio, and be able to collaborate and co-operate safely and productively within the studio environment.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

Marian Hosking

Contact hours

12 hours per week, including four hours of taught studio and eight hours of personal study and studio practice.

Prerequisites

OHS1000 and either JWL1331 or JWL1342 or VIS1112, APA1512

Prohibitions

APA2503

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

In this Metals and jewellery 4B unit students become more responsible for the delivery of their major study program, with emphasis placed on increasingly independent investigation, and the further development of the creative and expressive potential inherent in students' work. This, combined with staff consultation, continues to determine students' focuses for future metals and jewellery studio work. Self-motivated practice and research through which students articulate their conceptual and expressive strengths is increasingly utilised. Studio practice is less exploratory and with better grasp of theoretical issues relevant to students' practices.

Objectives

On successful completion of this unit, students should:

1. have further extended both their skills in art making and their vocabulary of materials and Metals and Jewellery studio processes;
2. be more able to select and develop a methodology for realising a self-directed practice, and be more committed to rigorous work practice;
3. have further developed levels of experimentation and investigation within their work, moving towards a focus on specific themes and technologies;
4. have futher developed their own technical, iconographic and conceptual concerns, and have a greater understanding of the critical, conceptual and theoretical issues surrounding contemporary Metals and Jewellery;
5. demonstrate an advanced capability for managing a project from initial idea, to presentation of the finished work;
6. have developed an increased capacity for the constructive appraisal of their own work, and that of others, and be able to articulate this through oral presentations and written documentation;
7. have increased understanding and practise the rules of occupational health and safety in force in the Metals and Jewellery studio, and be able to collaborate and co-operate safely and productively within the studio environment.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

Marian Hosking

Contact hours

12 hours per week, including four hours of taught studio and eight hours of personal study and studio practice.

Prerequisites

OHS1000 and JWL2323

Prohibitions

APA2504

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This level 3 metals and jewellery unit finely hones the skills acquired over the previous two years. At this stage of the course, students should demonstrate a high level of technical competence, facilitating work in their chosen field. Imagination combined with advanced conceptual lucidity, a prowess and innovation in material manipulation should be manifest at this stage of students' practice. Students develop an individual program in conjunction with the lecturer that reflects their personal direction and evolving metals and jewellery practice. The program focuses on clear articulation of concepts.

Objectives

On successful completion of this unit, students will:

1. be strongly self-motivated, and be able to construct independently a program of work with a coherent direction which imaginatively addresses their own concerns;
2. be able to produce works that display conviction, confidence and control in the handling of concepts and materials, and be able to isolate areas of their work that require further research and sustain a directed inquiry into these;
3. understand how to apply existing materials and technologies in new contexts;
4. be able to imaginatively and constructively criticise their own work and the work of others, and show an ability to make informed aesthetic judgements about the character and quality of such work;
5. be able to position their evaluations within the historical and contemporary context of Metals and Jewellery and intelligently express these observations;
6. be able to discuss productively, stylistic and semiotic issues relevant to current theory and practice;
7. understand and practise the rules of occupational health and safety in force in the Metals and Jewellery studio, and be able to collaborate and co-operate safely and productively within the studio environment with observance of the Occupational Health Safety and Environment regulations and policies of the studio.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

Marian Hosking

Contact hours

24 hours per week, including 8 hours of taught studio and 16 hours of personal study and studio practice.

Prerequisites

Either JWL2313 or JWL2314 or APA2104

Co-requisites

OHS1000

Prohibitions

APA3505

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit is the culmination of the metals and jewellery undergraduate program, and provides a stimulating and supportive environment. Students continue to work autonomously within an individually approved program of study as lecturers encourage the self-motivation, self-appraisal and professional responsibility required of the practising artist. A coordinator supervises the program and gives guidance as it is required and at the request of the students. Students continue to critically appraise their work and consolidate all conceptual, aesthetic and technical issues that relate to the individual direction of their metals and jewellery work.

Objectives

On successful completion of this unit, students should:

1. be able to demonstrate advanced skills and critical strategies in creativity, and be able to work independently with developed self-reliance;
2. be able to produce a coherent body of Metals and Jewellery work with both high technical standards and theoretical credibility in the framework of contemporary critical discourse;
3. possess a strong faculty and methodology for critical inquiry, enabling them to question and discuss lucidly the issues relevant to current theory and practice in Metals and Jewellery and in broader art and design practice;
4. approach contemporary Metals and Jewellery practice and aesthetics with challenge and vigour, and be able to establish a personalised and informed discourse within the context of Metals and Jewellery practice;
5. achieve a professional presentation and documentation of works in the final submission of their folio;
6. understand and practice the rules of occupational health and safety in force in the Metals and Jewellery studio, and be able to collaborate and co-operate safely and productively within the studio environment with observance of the Occupational Health Safety and Environment regulations and policies of the studio.

Assessment

Folio of studio work: 100%, of which at least 20% will be assessed before mid-semester.

Chief examiner(s)

Marian Hosking

Contact hours

24 hours per week, including 8 hours of taught studio and 16 hours of personal study and studio practice.

Prerequisites

Either JWL3315 or APA3105

Co-requisites

OHS1000

Prohibitions

APA3506

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to the language of multimedia and digital arts. The roles of multimedia designer and digital artist are explored. Methods for problem solving two-dimensional multimedia screen design and analysing electronic media are developed, and the various multimedia elements are defined, including text, image, sound, animation and video. Particular emphasis is placed on the role of text and images in multimedia design, including the skills and techniques to use these elements in electronic documents.

Objectives

On successful completion of this unit, students will:

1. understand the language of multimedia and the application of multimedia design principles;
2. understand the roles of multimedia designer and digital artist in electronic communication;
3. have an understanding of the nature of multimedia elements, including text, image, sound, animation and video;
4. be able to analyse electronic media, and identify the various multimedia elements used;
5. be able to use text and images as multimedia elements in electronic documents;
6. approach the problem-solving of two-dimensional multimedia screen design with an inquiring, adventurous and open attitude;
7. understand and be able to apply the rules of occupational health and safety appropriate to the unit of study

Assessment

Major projects: 85%. Journal: 15%

Chief examiner(s)

Jeff Janet

Contact hours

12 hours per week including; 1 hour lecture, 3 hour studio and 8 independent study hours per week

Prerequisites

DGN1001 and DIS1103

Co-requisites

OHS1000

Prohibitions

MMD1101 and MMD1102 and MMD1202

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit develops students' intermediate knowledge of multimedia design and digital arts principles with a strong emphasis on understanding and manipulating multimedia elements. The use of temporal and spatial elements is explored in the context of interactive media. Methods for problem solving multimedia design are examined from the point of view of the end user and design for interactivity. The view of multimedia design and digital art as a discipline is expanded through an awareness of the many different genres and applications of multimedia design.

Objectives

On successful completion of this unit, students will:

1. approach the problem-solving of interactive digital media and multimedia design with an inquiring, adventurous and open attitude;
2. be able to identify multimedia design problems and determine the appropriate multimedia elements in response to the design problem;
3. have an intermediate knowledge of principles of human-computer interface design;
4. be aware of the project management principles and strategies for successful team and collaborative work;
5. undertake research and application of multimedia design in projects such as motion graphics, information architecture, self-promotion, on-line corporate identity design, interactive environments, iconography/interface design, data-driven web design, and site specific installation; be able to prepare a folio presentation for self promotion, utilising a variety of appropriate media;
6. observe and employ occupational health and safety appropriate to studio practice.

Assessment

Minor Projects: 60%
Major Project 40%

Chief examiner(s)

Jeff Janet

Contact hours

12 hrs/ week, comprising: 1 hr lecture, 3 hrs tutorial and 8 independent study hrs

Prerequisites

MMD1302

Co-requisites

OHS1000

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces advanced principles of multimedia design and digital arts with a strong emphasis the combination of multimedia elements and practice in developing an outcome. Concepts relating to interaction, time and information architecture are explored in a practical framework. Methods for problem solving multimedia design are examined from the point of view of the end user and design for interactivity. The view of multimedia design and digital art as a discipline is expanded through an awareness of the many different genres and applications of multimedia design.

Objectives

On successful completion of this unit, students will:

1. approach the problem-solving of interactive digital media and multimedia design with an inquiring, adventurous and open attitude;
2. be able to identify multimedia design problems and determine the appropriate multimedia elements in response to the design problem;
3. have a developed knowledge of principles of human-computer interface design;
4. be able to implement project management principle and strategies for successful team and collaborative work;
5. undertake research and application of multimedia design in projects such as motion graphics, information archtiecture, self-promotion, on-line corporate identity design, interactive environments, iconography/interface design, data-driven web design and site specific installation; be able to prepare a folio presentation for self promotion, utilising a variety of appropriate media;
6. have a broad knowledge of multimedia design and digital arts practice and techniques;
7. obseve and employ occupational health and safety appropriate to studio practice

Assessment

Minor Projects: 60%
Major Project: 40%

Chief examiner(s)

Cameron Rose

Contact hours

12 hrs/ week, comprising: 1 hr lecture, 3 hrs tutorial and 8 independent study hrs

Prerequisites

MMD2303

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit introduces students to designing interactive systems within multimedia and digital arts studio practices. It builds sequentially upon the skills and knowledge of multimedia authoring by providing a focus upon multimedia production and activity-centered design for a range of digital media applications. Students explore approaches to user interfaces beyond the desktop, develop advanced technical skills with relevant software and hardware, and formulate new responses to participation and experience ideas that are specifically oriented to electronic and digital media.

Objectives

On successful completion of this unit, students should be able to:

1. skillfully and creatively develop Graphic User Interface(GUI) for a range of digital media applications with increasing confidence and proficiency;
2. demonstrate knowledge of the history of GUI and be able to analyse different models such as those based on usability issues, Human-Computer Interaction (HCI), activity-centred design and experience design;
3. develop GUI solutions that effectively explore software and hardware in terms of information architecture, usability, sound design, animation in the application of multimedia & digital arts;
4. explore a range of approaches to GUI design beyond the desktop with an increased understanding of processes, practices, methods and techniques for the production of interactive multimedia systems;
5. demonstrate increased technical understanding of demands required in the development and production of interactive multimedia systems;
6. observe and employ occupational health and safety appropriate to studio practice.

Assessment

Exercises: 30%
Project: 60%
Journal: 10%

Chief examiner(s)

Cameron Rose

Contact hours

12 hours per week, comprising: 4 taught hours (1 hr lecture plus 3 hrs tutorial) and 8 independent study hours.

Prerequisites

Must have passed both MMD2303 and MMS2402 or both MMD2302 and FIT2012

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit provides students with the opportunity for high-level studio practice in multimedia design. It builds sequentially upon the skills and knowledge of multimedia by providing a focus on creative image and media production for a range of art and design applications. Emphasis is placed on combining techniques in imaging, visualisation, animation, interactivity, interface design, scripting and information architecture to develop creative and functional outcomes. The unit offers students the opportunity to develop multimedia projects that will address all levels of the creative process and project management, from conceptualisation and visualisation through to execution and presentation.

Objectives

On successful completion of this unit, students should be able to:

1. conceive, create and realize media assets (ie. digital images, video, sound) and productions (ie. interface designs, temporal and spatial elements, interactives) with increased expertise (ie. skill, confidence and proficiency) appropriate to an advanced level of studio practice in the discipline;
2. apply creativity, problem-solving, research and project development directly associated with multimedia design, digital imaging and interactive media to explore a range of creative solutions in response to project-based scenarios (ie. individual, collaborative, group) and briefs (ie. client-based, self-directed);
3. produce creative multimedia outcomes with increased conceptual understanding of design principles, end-user considerations, interactivity, visual language and communication that takes into account the professional, industry-related demands of multimedia practice;
4. demonstrate an increased technical proficiency across the development, acquisition, creation and production of digital media, using industry standard software applications, peripheral devices and addressing the requirements a variety of delivery platforms;
5. display a developed creative approach, personalised artistic expression and awareness of the many different genres and applications of multimedia commensurate with an advanced level of studio practice; and
6. observe and employ occupational health and safety appropriate to studio practice.

Assessment

Folio of studio/project work with (100%) of which at least 20% will be assessment before mid semester.

Chief examiner(s)

Mark Guglielmetti

Contact hours

24 hours per week; comprising: 8 contact hours and 18 independent study hours.

Prerequisites

MMD2304

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit provides students with the opportunity for high-level studio practice in multimedia design. It builds sequentially upon the skills and knowledge of multimedia by providing a focus on creative image and media production for a range of art and design applications. Emphasis is placed on combining techniques in imaging, visualisation, animation, interactivity, interface design, scripting and information architecture to develop creative and functional outcomes. The unit offers students the opportunity to develop multimedia projects that will address all levels of the creative process and project management, from conceptualisation and visualisation through to execution and presentation.

Objectives

On successful completion of this unit, students should be able to:

1. conceive, create and realize media assets (ie. digital images, video, sound) and productions (ie. interface designs, temporal and spatial elements, interactives) with increased expertise (ie. skill, confidence and proficiency) appropriate to an advanced level of studio practice in the discipline;
2. apply creativity, problem-solving, research and project development directly associated with multimedia design, digital imaging and interactive media to explore a range of creative solutions in response to project-based scenarios (ie. individual, collaborative, group) and briefs (ie. client-based, self-directed);
3. produce creative multimedia outcomes with increased conceptual understanding of design principles, end-user considerations, interactivity, visual language and communication that takes into account the professional, industry-related demands of multimedia practice;
4. demonstrate an increased technical proficiency across the development, acquisition, creation and production of digital media, using industry standard software applications, peripheral devices and addressing the requirements a variety of delivery platforms;
5. display a developed creative approach, personalised artistic expression and awareness of the many different genres and applications of multimedia commensurate with an advanced level of studio practice; and
6. observe and employ occupational health and safety appropriate to studio practice.

Assessment

Folio of studio/project work (100%) of which at least 20% will be assessment before mid-semester.

Chief examiner(s)

Mark Guglielmetti

Contact hours

24 hours per week, comprising: 8 contact hours and 16 independent study hours

Prerequisites

MMD3305

Refer to the specific census and withdrawal dates for the semester(s) in which this unit is offered.

Synopsis

This unit provides students with the opportunity for high-level studio practice in digital art. It builds sequentially upon the skills and knowledge of digital art by providing a focus on creative image and media production for a range of art and design applications. Emphasis is placed on combining techniques in imaging, visualisation, animation, interactivity, interface design, scripting and information architecture to develop creative and functional outcomes. The unit offers students the opportunity to develop digital art projects that will address all levels of the creative process and project management, from conceptualisation and visualisation through to execution and presentation.

Objectives

On successful completion of this subject, students should be able to:

1. conceive, create and realize media assets (ie. digital images, video, sound) and productions (ie. interface designs, temporal and spatial elements, interactives) with increased expertise (ie. skill, confidence and proficiency) appropriate to an advanced level of studio practice in the discipline;
2. apply creativity, problem-solving, research and project development directly associated with multimedia design, digital imaging and interactive media to explore a range of creative solutions in response to project-based scenarios (ie. individual, collaborative, group) and briefs (ie. client-based, self-directed);
3. produce creative digital art outcomes with increased conceptual understanding of design principles, end-user considerations, interactivity, visual language and communication that takes into account the artistic, self-expressive demands of digital arts practice;
4. demonstrate an increased technical proficiency across the development, acquisition, creation and production of digital media, using industry standard software applications, peripheral devices and addressing the requirements a variety of delivery platforms;
5. display a developed creative approach, personalised artistic expression and awareness of the many different genres and applications of digital art commensurate with an advanced level of studio practice; and
6. observe and employ occupational health and safety appropriate to studio practice.

Assessment

Folio of studio/project work (100%) of which at least 20% will be assessed before mid semester.

Chief examiner(s)